User Manual

9400 Technology applications | Positioning sequence control
About this documentation
6 L EDS94TA10060xxxx EN 1.2 - 03/2010
1 About this documentation
This documentation contains information about the technology application "Positioning
sequence control" for the Servo Drives 9400 series.
The information in this documentation applies to:
The technology application can be used with the following controllers:
Target group
This documentation is directed at qualified personnel according to IEC 364.
Document history
 Note!
This documentation supplements the mounting instructions supplied with the
controller, the hardware manual and the software manual for the controller.
The Mounting Instructions contain safety information which must be observed!
Technology application Appl. ID Required runtime software licence
Positioning sequence control 100602103 Motion Control TopLevel or higher
Product series Type designation From hardware
version
From software
version
9400 Servo Drives E94AxHExxxx PD 1.35
Version Description
1.0 04/2007 TD05 First edition
1.1 10/2008 TD05 New subchapter "Parameterisable function blocks
"
1.2 03/2010 TD05 Error corrections & supplements