User Manual

9400 Technology applications | Positioning sequence control

Short setup

Step 3: Parameterising the program flow

24 L EDS94TA10060xxxx EN 1.2 - 03/2010

4.6.7 Program step 7: Resetting the status output

4.6.8 Program step 8: Going back to program step 2

Action Comment Parameter Setting

Reset sequence control output 1 to "0", when start

position is reached.

Selection Action Number: 2

Output for A switching: Output 1

Signal state for A switching:

Output for B switching: Deactivated

Signal state for B switching:

Action Comment Parameter Setting

Go back to program step 2. Selection Action Number: 1

Jump input: Continue

with next

step

Jump destination: 2