User Manual

9400 Technology applications | Positioning sequence control
Short setup
Step 1: Creating a project
16 L EDS94TA10060xxxx EN 1.2 - 03/2010
4.4 Step 1: Creating a project
1. Start »Engineer«.
2. Go to Start-up wizard and select the option "New project (empty)" and enter a name for
the project in a next step.
3. Insert the axis for the sheet stacker.
– Add the corresponding components (controller, motor, extension module) to the
axis.
– Select the application "Positioning sequence control" for the controller.
–Example project view in the »Engineer«: