Manual

EDS94TA10030xxxx EN 1.2 - 11/2009 L 77
9400 Technology applications | Electronic gearbox
Parameter setting & configuration
Parameterisable function blocks
5.16.11 Trimming
Is an instance of Function
L_LdMPot Master value trimming
( 47)
Parameter Possible settings Information
C03685 -214000.0000 unit/t 214000.0000 Positive speed
•Initialisation:
400.0000 units/t
C03686 -214000.0000 unit/t 214000.0000 Negative speed
•Initialisation:
-200.0000 units/t
C03687 0.001 s 130.000 Acceleration ramp
• Initialisation: 1.000 s
C03688 0.001 s 130.000 Deceleration ramp
• Initialisation: 1.000 s
C03689 0.001 s 130.000 Ramp for motor potentiometer off
• Initialisation: 1.000 s
C03690 -214748.3647 unit 214748.3647 Speed at the output
•Read only
• Is generated from the speed
signal dnSpeedOut_s.
C03691 Character string Speed unit
•Read only
C03692 -214748.3647 unit/t 214748.3647 Reference speed
•Read only
• Reference value for selecting
speeds.