Manual

9400 Technology applications | Electronic gearbox
Parameter setting & configuration
Parameterisable function blocks
70 L EDS94TA10030xxxx EN 1.2 - 11/2009
5.16.3 ConvertElShaftMotor
Is an instance of Function
L_LdConvAxisV Transformation ratio of speed between two axes.
Setpoint conditioning
( 48)
Parameter Possible settings Information
C03715 Coupling of measuring systems X
and Y
0 Coupling via feed constants Lenze setting
1 Coupling via cycles
2 Free coupling
C03716/1 0 unit 214748.3647 Cycle X
•Read only
C03716/2 0 unit 214748.3647 Cycle Y
•Read only
C03717/1 0.0000 214748.3647 Coupling factor X
• Initialisation: 1.0000
C03717/2 0.0000 214748.3647 Coupling factor Y
• Initialisation: 1.0000
C03718/1 Character string User-defined unit X
•Read only
C03718/2 Character string User-defined unit Y
•Read only
C03720/1 -214748.3647 unit/t 214748.3647 Speed X at the input
•Read only
• Is generated from the speed
signal dnSpeedIn_s.
C03720/2 -214748.3647 unit/t 214748.3647 Speed Y at the output
•Read only
• Is generated from the speed
signal dnSpeedOut_s.
C03724 -2147483647 2147483647 State
• Display of the bit-coded output
signal dnState.