Manual

9400 Technology applications | Electronic gearbox
Parameter setting & configuration
Operating mode "Electronic gearbox"
48 L EDS94TA10030xxxx EN 1.2 - 11/2009
5.4.4 Setpoint conditioning
[5-8] "Setpoint conditioning" function in the signal flow (schematic diagram)
This function is used for speed ratio between the master shaft and the machine axis.
 Parameter setting: Tab All parameters  Category Electronic gearbox 
ConvertElShaftMotor
 Configuration: Tab FB editor  FB ConvertElShaftMotor
n Master value with trimming
o Actual value
M
v
Slave
Real master/
Virtual master
v
t
Dv
C03006 = 1


Parameter Lenze setting
Value Unit
C03715 Operating mode Unit coupling
C03717/1 Reference variable X 1.0000
C03717/2 Reference variable Y 1.0000