Owner manual

L Firmware 1.37 - 09/2006 625
9400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C02580
C02580
C02581
C02582
C02583
C02585
Parameter | Name:
C02580 | Brake operating mode
Data type: UNSIGNED_32
Index: 21995
d
= 55EB
h
Basic function "Brake control"
Selection list
(Lenze setting printed in bold)
0 Brake control off
1 Directly with brake module
2Autom. with brake module
11 Direct - external switching
12 Autom. - external switching
; Read access ; Write access ; CINH  PLC STOP  No transfer  COM  MOT
Parameter | Name:
C02581 | Brake activation threshold
Data type: INTEGER_32
Index: 21994
d
= 55EA
h
Basic function "Brake control"
Setting range
(min. value | unit | max. value) Lenze setting
0 rpm 50000 50 rpm
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT
Parameter | Name:
C02582 | Brake resp. to pulse inhibit
Data type: UNSIGNED_32
Index: 21993
d
= 55E9
h
Basic function "Brake control"
Selection list
(Lenze setting printed in bold)
0 Activate the brake immediately
1 Acivate brake when n <nmin
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT
Parameter | Name:
C02583 | Status input monitoring
Data type: UNSIGNED_32
Index: 21992
d
= 55E8
h
Basic function "Brake control"
Selection list
(Lenze setting printed in bold)
0Not active
1active
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT
Parameter | Name:
C02585 | Brake control polarity
Data type: UNSIGNED_32
Index: 21990
d
= 55E6
h
Basic function "Brake control"
Selection list
(Lenze setting printed in bold)
0 Not inverted
1Inverted
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT