Owner manual

L Firmware 1.37 - 09/2006 511
9400 HighLine | Parameter setting & configuration
Diagnostics & error analysis
Error messages of the operating system
CAN module (MXI1): Node guarding error 15 [0x00a0000e]
CAN module (MXI1): Node guarding error 16 [0x00a0000f]
CAN module (MXI1): Node guarding error 17 [0x00a00010]
CAN module (MXI1): Node guarding error 18 [0x00a00011]
CAN module (MXI1): Node guarding error 19 [0x00a00012]
CAN module (MXI1): Node guarding error 20 [0x00a00013]
Response (Lenze setting printed in bold) Setting: C13612/15 (; Adjustable response)
: None  System fault ; Fault ; Trouble ; Quick stop by trouble ; Warning locked ; Warning ; Information
Cause Remedy
CANopen communication module in MXI1: CAN master
has not received a response to a node guarding telegram
from node 15.
See remedy for "Node guarding error 1
".
Response (Lenze setting printed in bold) Setting: C13612/16 (; Adjustable response)
: None  System fault ; Fault ; Trouble ; Quick stop by trouble ; Warning locked ; Warning ; Information
Cause Remedy
CANopen communication module in MXI1: CAN master
has not received a response to a node guarding telegram
from node 16.
See remedy for "Node guarding error 1
".
Response (Lenze setting printed in bold) Setting: C13612/17 (; Adjustable response)
: None  System fault ; Fault ; Trouble ; Quick stop by trouble ; Warning locked ; Warning ; Information
Cause Remedy
CANopen communication module in MXI1: CAN master
has not received a response to a node guarding telegram
from node 17.
See remedy for "Node guarding error 1
".
Response (Lenze setting printed in bold) Setting: C13612/18 (; Adjustable response)
: None  System fault ; Fault ; Trouble ; Quick stop by trouble ; Warning locked ; Warning ; Information
Cause Remedy
CANopen communication module in MXI1: CAN master
has not received a response to a node guarding telegram
from node 18.
See remedy for "Node guarding error 1
".
Response (Lenze setting printed in bold) Setting: C13612/19 (; Adjustable response)
: None  System fault ; Fault ; Trouble ; Quick stop by trouble ; Warning locked ; Warning ; Information
Cause Remedy
CANopen communication module in MXI1: CAN master
has not received a response to a node guarding telegram
from node 19.
See remedy for "Node guarding error 1
".
Response (Lenze setting printed in bold) Setting: C13612/20 (; Adjustable response)
: None  System fault ; Fault ; Trouble ; Quick stop by trouble ; Warning locked ; Warning ; Information
Cause Remedy
CANopen communication module in MXI1: CAN master
has not received a response to a node guarding telegram
from node 20.
See remedy for "Node guarding error 1
".