Owner manual

L Firmware 1.37 - 09/2006 445
9400 HighLine | Parameter setting & configuration
Diagnostics & error analysis
Error messages of the operating system
15.6.1.3 Module ID
Use the module-ID to identify the module in which the error has occurred.
r The following table lists the module-ID in hexadecimal format:
15.6.1.4 Error ID
16-bit value (0 ... 65535
dec
) for error identification.
1 1 0 Instance-ID 6
1 1 1 Instance-ID 7
Bit 28 Bit 27 Bit 26 Meaning
Module-ID Module
0x0065 Logbook module
0x0068 Module identification
0x0069 Error check of the program memory during runtime
0x006a Run-time environment for IEC 61131-3 programs
0x006e Supply voltage monitoring
0x0072 SERVICEREGISTER
0x0075 Device control
0x0077 Temperature monitoring
0x0078 Analog signal monitoring
0x0079 Motor data interface
0x007a Processing of digital inputs/outputs
0x007b Motor control
0x007d Processing of analog inputs/outputs
0x007f Intelligent communication module
0x0083 CAN dispatcher
0x0084 CAN NMT handler
0x0085 CAN emergency handler
0x0086 CAN NMT master
0x0087 CAN PDO handler
0x0088 CAN SDO server
0x0089 CAN SDO client
0x008c Application Project Manager
0x008e Communication interface for internal communication
0x0090 Parameter Manager
0x0091 Lenze run-time system
0x0092 Interface for safety module
0x0093 Sync signal generation
Bit 31 1625262829 015
Bit 31 1625262829 015