Owner manual

L Firmware 1.37 - 09/2006 387
9400 HighLine | Parameter setting & configuration
TAs for positioning tasks
TA "Multi-purpose positioning" | Program flow
r The following table lists the corresponding module outputs of the FB interconnection
and the corresponding selection numbers for the multiplexer parameters:
Parameterise signal combinations (C 237)
Module output Signal type Selection no. Selection text
SequencerOutput.bBit0 { 551 Sequencer output 1
SequencerOutput.bBit1 552 Sequencer output 2
SequencerOutput.bBit2 553 Sequencer output 3
... ... ...
SequencerOutput.bBit31 582 Sequencer output 32