User guide

Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05 457
5 Function blocks
5.120 L_SdGetAxisData - Reading out machine parameters from axis data
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Parameter
dwBitsPerRevolution
DWORD
Resolution of an encoder revolution
• Display parameter: C04418
10 Bit / encoder revolution
... ...
24 Bit / encoder revolution
dwIncrPerRevolution
DWORD
Resolution of a revolution in [increments]
dwFeedType
DWORD
Traversing range
• Display parameter: C04422
0 Unlimited
1 Limited
2Modulo
 Note!
Observe that the index of the codes listed in the following only applies to the first in-
stance!
Parameter Possible settings Information
C04410/1 1 2147483647 Gearbox factor (numerator)
•Read only
C04410/2 1 2147483647 Gearbox factor (denominator)
•Read only
C04411 0.0001 Unit/incr. 214748.3647 Feed constant
•Read only
C04412 String of digits with max. 16 characters Unit
•Read only
C04413 String of digits with max. 8 characters Time unit
•Read only
C04414 String of digits with max. 16 characters Axis name
•Read only
C04416 0.0000 Unit 214748.3647 Cycle
•Read only
C04418 10 Bit 24 Resolution of an encoder revolution
•Read only
C04420 -214748.3647 Unit/t 214748.3647 Reference speed
•Read only
C04422 Traversing range
•Read only
0Unlimited
1 Limited
2Modulo
C04424 -2147483.647 2147483.647 Resulting gearbox factor
•Read only
C04425 -214748.3647 Incr./unit 214748.3647 Resolution of a unit
•Read only
Identifier/data type Value/meaning