User guide

3 Working with the FB editor
3.2 User interface
38
Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.2 User interface
 How to access the FB editor:
1. Go to Project View and select the 9400 controller.
2. Go to Workspace and select the FB Editor tab.
Controller with selected technology application
If you have selected a technology application for the controller from the catalogue, the FB Editor dis-
plays the interconnection of the technology application defined by Lenze:
• First the FB Editor is in the "Viewer" mode, in which the displayed objects/connections cannot
be changed. Using the FB-Editor as "Viewer"
( 48)
• To be able to reconfigure the defined interconnection and to add further functions, the FB Editor
must be enabled explicitly. Enabling the FB Editor
( 51)
 Note!
The first representation on the FB Editor tab depends on whether you have selected a
technology application for the controller from the catalogue or not.