User guide

Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05 157
5 Function blocks
5.4 L_CamGetAxisData - reading out machine parameters from cam data
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C05413 0.0000 Unit 214748.3647 Cycle
•Read only
C05414 0.0000 Unit/t 214748.3647 Reference speed
•Read only
C05415 0.0000 Unit/t 214748.3647 Max. machine speed
•Read only
C05419 Error messages: Status (bit-coded)
• Bits that are not listed are reser-
ved for future extensions.
• Bit 31 is always set if one or more
of the other error bits (bit 16 ...
bit 30) are set.
Bit16 Position is beyond the cycle
Bit 31 General error
Parameter Possible settings Info