Instructions Owner manual

Mechanical installation
Mounting steps
Fixing the mounting frame to the wall
5

36
BA_CSx8xx EN 3.0
Without add−on component

29.5
106
70
160

2
1


6

0
0
2
3
3 3
CS57x0−010
How to proceed:
1. Prepare the wall for mounting the wall bracket .
– The mounting location and the installation material must provide for a permanent
mechanical connection.
2. Stick the self−adhesive seal  on the adapter plate  on the side with the threaded
bolts.
3. Screw the wall bracket  and the adapter plate  to the swivel adapter .
– 2 x 4 countersunk head screws M5 x 16 mm with washers Æ 5.3 mm and nuts M5
4. Pull the connecting cable through the swivel adapter  and screw the swivel
adapter to the wall.
5. Screw the mounting frame  to the swivel adapter .
– 4 nuts M5 with washers Æ 5.3 mm
Now you can connect the Command Station ( 39).