Instructions User guide

Installation
Mounting steps
Fixing the mounting frame to the support arm
4

29
MA_CSx0xx DE/EN/FR/ES/IT 2.0
4.2.2 Fixing the mounting frame to the support arm
Without add−on component

1
0

6

1
3
2
1
CS57x0−005
How to proceed:
1. Check support arm system for professional mounting and sufficient
carrying capacity.
– See support arm documentation.
2. Stick the self−adhesive seal  on the adapter plate  on the side with the
threaded bolts.
3. Pull the connecting cables  out of the support arm  and screw the
adapter plate  to the support arm .
– For screws see support arm documentation.
4. Screw the mounting frame  to the adapter plate .
– 4 nuts M5 with washers Æ 5.3 mm
Now you can connect the Command Station ( 33).