Instruction Manual

Lenze · Backup & Restore · Software Manual · DMS 1.3 EN · 04/2014 · TD17 7
1 About this documentation
1.2 Conventions used
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1.2 Conventions used
This documentation uses the following conventions for highlighting different types of information:
Type of information Identification Examples/notes
Numbers
Decimal Normal spelling Example: 1234
Decimal separator Point In general, the decimal point is used.
Example: 1234.56
Hexadecimal 0x[0 ... 9, A ... F] Example: 0x60F4
Binary
• Nibble
0b[0, 1] Example: ’0b0110’
Example: ’0b0110.0100’
Text
Version information Text colour blue All pieces of information that only apply to or from a specific
software version of the controller are highlighted
correspondingly in this documentation.
Example: This function extension is available from software
version V3.0!
Program name » « »PLC Designer«...
Window italics The message window... / The Options dialog box ...
Variable name Setting bEnable to TRUE...
Control element Bold The OK button ... / The Copy command ... / The Properties tab
... / The Name input field ...
Sequence of menu
commands
If several commands must be used successively to carry out
a function, the individual commands are separated by an
arrow: Select File
Open to...
Shortcut <Bold> Use <F1> to open the online help.
If a key combination is required for a command, a "+" is
placed between the key identifiers: With <Shift>+<ESC>...
Hyperlink underlined
Reference to further information: Hyperlink to further
information.
Icons
Page reference ( 7) Reference to further information: Page number in PDF file.
Step-by-step instructions

Step-by-step instructions are marked by a pictograph.