Instruction Manual

4 Creating a backup & carrying out recovery

4.1 Creating a backup

Lenze · Backup & Restore · Software Manual · DMS 1.3 EN · 04/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

4.1.2 Creating a backup: Directly on the controller

[4-2] Illustration example: »Backup & Restore« under Windows CE ()

 How to carry out a backup:

1. Connect the USB stick to the USB interface of the controller.

2. Start »Backup & Restore« on the controller.

3. Select the Backup tab.

4. Assign backup name in the input field (length: 2-16 characters)

Further information: Components of the backup designation

( 22)

5. Press Start.

»Backup & Restore« writes the control file to the USB stick.

6. Restart controller (with connected USB stick) by mains switching.

• Contollers in Windows CE systems are automatically restarted.

• The backup data are saved to the \Backup subdirectory on the USB stick after successful

write operation.

7. After the boot-up of the controller: Remove the USB stick from the controller.

 Note!

Cabinet controllers with a DVI interface require an external Monitor Panel.