Instruction Manual

Lenze · Backup & Restore · Software Manual · DMS 1.3 EN · 04/2014 · TD17 21
4 Creating a backup & carrying out recovery
4.1 Creating a backup
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4 Creating a backup & carrying out recovery
The »Backup & Restore« functionality of the controller can be executed using different software
applications. They are listed in the following subchapters.
There are different possibilities for carrying out a backup, restore/update:
1. With the Engineering PC: »Backup & Restore« application/via »WebConfig«
2. Directly with the »Backup & Restore« application.
Standard procedure
4.1 Creating a backup
 Note!
•A backup saves all data of the controller. (data of the internal flash memory and data
of the SD card).
• For a successful creation of a backup there has to be a sufficient amount of free memory
capacity on the USB stick.
Guide value for the size of a backup file:
• Windows CE 6.0: 100 MB (3200 C/p500)
• Windows Embedded Compact 7: 200 MB (c300/p300)
• Windows Embedded Standard: 2 GB
• The free memory capacity of the USB stick at least
has to be half of the SD card
capacity + 2 GB (guide value for Windows embedded standard).
• Remove the USB stick from the controller after the successful execution of the backup.