L-force Controls .
Control technology | IPC Backup & Restore Contents Contents 1 2 3 2 About this documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1 Document history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.2 Conventions used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control technology | IPC Backup & Restore Contents 4 5 6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 4.1 Archiving and restoring Compact Flash cards (CF cards) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.1 Duplicate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.2 Archive. . . . . . . . . . . .
Control technology | IPC Backup & Restore About this documentation 1 About this documentation This documentation contains information on the parameterisation and configuration of industrial PCs. The "PC-based automation" supports industrial PCs of the following device series: EL 1800 - EL 9800, CS 5800 - CS 9800, CPC 2800.
Control technology | IPC Backup & Restore About this documentation Further technical documentation on Lenze components More information on Lenze components that can be used together with "PC-based automation" can be found in the following documentation: Mounting & wiring Legend: MA 8400 StateLine/HighLine Printed documentation MA 9400 StateLine/HighLine Online help/PDF MA EPM-Txxx (I/O system IP20) Abbreviations used: MA EPM-Sxxx (I/O system 1000) SHB System Manual MA 8200 vector
Control technology | IPC Backup & Restore About this documentation Document history 1.1 Document history Version Description 1.0 05/2007 TD16 First edition 1.1 08/2007 TD16 Changed version due to updated software version • Screen pictures updated 1.2 10/2007 TD16 Short menu reference added 1.3 11/2007 TD16 Changed version due to updated software version • Detailed description of the Backup & Restore processes 1.
Control technology | IPC Backup & Restore About this documentation Conventions used 1.2 Conventions used This documentation uses the following conventions to distinguish between different types of information: Type of information Highlighting Examples/notes Notation of numbers Decimal separator Point The decimal point is generally used. For instance: 1234.56 Text Version information Program name Window Blue text colour »« The Message window... / The Options dialog box... Bold The OK button ..
Control technology | IPC Backup & Restore About this documentation Terminology used 1.3 8 Terminology used Term Meaning Compact Flash card (CF card) The terms Compact Flash card and CF card are used synonymously. The dialogs of the user interface use the designation CF card. The CF card is the central memory medium of the industrial PC. The industrial PC cannot run without the CF card. L 1.
Control technology | IPC Backup & Restore About this documentation Definition of notes used 1.
Control technology | IPC Backup & Restore Introduction Functions 2 Introduction This chapter contains information on the function of the archive, backup, and restore. »IPC Backup & Restore« requires the Microsoft Windows® XP operating system. 2.1 Functions The »IPC Backup & Restore« software provides the following basic functions: 1. Creation and management of archives Archive ( 25), 2. Creation of backups Backup with USB stick ( 27), 3. Update of the runtime software Update ( 31).
Control technology | IPC Backup & Restore Introduction Functions Information on different Compact Flash(CF) versions 2.1.2 Version Function Fixed Disk(non removable) • The CF card can be used like a hard disk. • Partitioning and formatting is possible. Removable Disk • The CF card can be formatted, but partitioning is not possible. Ultra direct memory access (UDMA) Ultra direct memory access • provides direct and quicker data access to the contents of the CF card.
Control technology | IPC Backup & Restore Introduction Differences between archive, backup, and restore 2.2 Differences between archive, backup, and restore Note! The archive of a CF card is basically different from a backup of an industrial PC. The contents and the structure of archive and backup are different. This is why an archive can, for instance, not be replaced by a backup. 2.2.1 What is an archive? The term Archive describes the contents of a CF card.
Control technology | IPC Backup & Restore Introduction Using an archive 2.3 Using an archive You can restore the archive of a CF card on your engineering PC on a new Compact Flash card. Note! Observe the differences between the storage media when restoring archives! • A restore only restores configuration-dependent software components. • During the restore, the whole contents of the Compact Flash card are restored.
Control technology | IPC Backup & Restore Introduction Using a backup 2.4 Using a backup Whereas CF card archives represent a complete data base, USB sticks are designed for the backup of individual IPC components. An advantage of the use of backups is the automatic backup functionality when booting up the industrial PC. Unlike CF card archiving, the USB stick is not to be removed from the industrial PC.
Control technology | IPC Backup & Restore Introduction Using a backup The more IPC components you select, the more memory space is required on your USB stick. When creating the first backup, all components should be selected. Data ( 29) As soon as backups are created at regular intervals, we recommend only to backup the IPC components that change. These are mainly data. Please read the section Backup with USB stick ( 27) to see which data are backed up.
Control technology | IPC Backup & Restore Introduction Using a restore 2.5 Using a restore Restoring an archive located on the engineering PC on a Compact Flash card (CF card). To restore data, the USB stick must be switched from the engineering PC to the industrial PC. Note! • Restore with a USB stick only restores the IPC components previously selected, • Restore the CF card restores all data bases of the CF card.
Control technology | IPC Backup & Restore Introduction Summary of the functions 2.6.2 USB stick (backup) Note! A backup created with a USB stick must only be restored via a USB stick. When the contents of a CF card are archived, the contents must only be restored on another CF card. To ensure an error-free backup and restore, only use CF cards made by the company swissbit®.
Control technology | IPC Backup & Restore User interface Control & function elements 3 User interface This chapter describes the different control and function elements of the »IPC Backup & Restore« user interface for Windows® XP. 3.1 Control & function elements The user interface contains the following control and function elements: Title bar Menu bar View bar Operating range Note! The Select your Compact Flash card selection field only displays removable media.
Control technology | IPC Backup & Restore User interface Control & function elements 3.1.1 Title bar In the Title bar in the upper position of the application window, the Program icon and Program name are displayed in the left-most position and the Window icons are displayed in the right-most position: The view of the application window can be changed via the Window icons 0 1 2 .
Control technology | IPC Backup & Restore User interface Exit program 3.1.4 Operating range In the Operating range the properties and settings of the element currently selected in the View bar are displayed in different tabs and can also be changed here. When the tab in the upper position is clicked, the corresponding tab comes to the foreground. Tip! The individual tabs which are displayed in the Operating range depend on the type of the element selected. 3.
Control technology | IPC Backup & Restore Operation 4 Operation The »IPC Backup & Restore« software serves to back up and restore data of the industrial PC on a Compact Flash card (CF card) or a USB stick. [4-1] Menu structure - overview Note! Risk of data loss! When duplicating or restoring a CF card, the data carrier is formatted and made bootable.
Control technology | IPC Backup & Restore Operation Archiving and restoring Compact Flash cards (CF cards) 4.1 Archiving and restoring Compact Flash cards (CF cards) Note! Data archived on the engineering PC remain stored after »IPC Backup & Restore« has been uninstalled. 4.1.1 Duplicate Note! To ensure an error-free backup and restore, only use CF cards made by the company swissbit®. Note! The CF card to which the data of the temp directory is to be copied is formatted and made bootable.
Control technology | IPC Backup & Restore Operation Archiving and restoring Compact Flash cards (CF cards) How to duplicate a CF card: 1. Connect the CF card to be copied as the data source to the engineering PC. 2. Select the corresponding CF card from the Drive selection field. 3. Press Start. • 1. Read in 4. Replace the read-in CF card with another CF card to which the data are to be copied. The CF card has been read in. Insert a new CF card and press Start to start writing.
Control technology | IPC Backup & Restore Operation Archiving and restoring Compact Flash cards (CF cards) 5. Insert a new CF card. The contents of your Compact Flash card has been read in. Press Start to write to the new CF card. Note: The CF card is formatted. This deletes all data stored on the CF card! 6. Press Start to write the data to the CF card. • 2. Write to Compact Flash card. • The progress bar indicates the progress of copying. • Copying completed. 24 L 1.
Control technology | IPC Backup & Restore Operation Archiving and restoring Compact Flash cards (CF cards) 4.1.2 Archive The Archive tab serves to recreate a backup folder. The contents of a CF card are then copied to the directory selected. How to copy the contents of a CF card to the hard disk: 1. Select the corresponding CF card from the Please select your Compact Flash card selection field. 2. Go to the Create a new backup directory input field and create a new directory.
Control technology | IPC Backup & Restore Operation Archiving and restoring Compact Flash cards (CF cards) 4.1.3 Unarchive The Unarchive tab serves to select an archive or to create a new archive. The contents of the folder are then written to the CF card selected. Note! To ensure an error-free backup and restore, only use CF cards made by the company swissbit®. The CF card to be restored is formatted and made bootable.
Control technology | IPC Backup & Restore Operation Backup & Restore with a USB stick 4.2 Backup & Restore with a USB stick Note! Risk of data loss! Only select the USB stick when the USB stick tab is activated. The storage medium selected in Backup & Restore must correspond to the storage medium physically available! 4.2.1 Backup with USB stick Note! A backup backs up all data and subfolders of the \IPC folder of the CF card.
Control technology | IPC Backup & Restore Operation Backup & Restore with a USB stick Option Information Backup files available on the USB stick Name of a backup data package: IPCUpdate__ • Date/time formats: • Date = YYYYMMDD • Version=Vx.x.x.xxx Example: IPCUpdate_PM_V2.0.0.
Control technology | IPC Backup & Restore Operation Backup & Restore with a USB stick Option Information • Lenze software The software of Cabinet(*.CAB) files type supplied by Lenze. This file manages all version numbers of the individual Cabinet files. • System configuration Hardware identification file SWInfo.xml (not required anymore from control technology R2.2 onwards).
Control technology | IPC Backup & Restore Operation Backup & Restore with a USB stick How to carry out a backup: 1. Configure the USB stick with »IPC Backup & Restore« on the engineering PC. 2. Insert USB stick in industrial PC. 3. Boot up industrial PC. 4. Write backup through industrial PC to USB stick. 5. Insert USB stick in engineering PC. 6. Store data from USB stick on engineering PC.
Control technology | IPC Backup & Restore Operation Backup & Restore with a USB stick 4.2.3 Update This function serves to prepare a USB stick for a software update of an industrial PC by transferring the required software update to the USB stick. The stored software update from the USB stick can then be installed on the CF card of the industrial PC. For the control of the update process in the industrial PC the control file is additionally written to the USB stick.
Control technology | IPC Backup & Restore Operation Backup & Restore with a USB stick How to save the software update on the USB stick: 1. Select available USB stick 2. Go to the "Select the base path for Lenze updates" selection field and select the base path which contains the folder with the updates. • Select the directory above the version folder. Example: The software update is located in the \IPC-SoftwareUpdates\V2.2.0.xxx folder.
Control technology | IPC Backup & Restore Operation Backup & Restore with a USB stick CAB: Lenze software CESYS: Windows® CE operating system, boot loader After the write process of the »IPC Backup & Restore« has been completed, the data required for a software update are available on the USB stick. Then execute a software update by connecting the USB stick to the industrial PC. Executing a software update at the industrial PC Note! If software update version 1.
Control technology | IPC Backup & Restore Operation Device replacement 4.3 Device replacement A device replacement is required if a defective hardware (x700 system) is to be replaced with the follow-up system (x800). The Device replacement function serves to prepare the CF card of a replacement device using »IPC Backup & Restore«, so that the configuration data of IPC 1 (like for instance parameters, boot project, visualisation) can be transferred to the replacement device (x800 system).
Control technology | IPC Backup & Restore Operation Device replacement • Select CF card with the source data (old device) 2. Press Start • Import source data of the CF card 3. Insert CF card of the replacement device 4. Press Start • Convert source data and write them to the CF card of the replacement device. 5. Insert CF card in the replacement device. 1.
Control technology | IPC Backup & Restore Short menu reference "File" menu 5 Short menu reference This chapter contains a list of all menu commands. 5.1 "File" menu Icon Command Shortcut Exit 5.2 Exit program "View" menu Icon Command Refresh 5.3 Shortcut F5 Command Shortcut Languages Refresh the Backup/ Restore tab. The view is refreshed via the control file of the USB stick.
Control technology | IPC Backup & Restore Index 6 Index A W Application notes 9 Archiving a CF card 13 What is a backup? 12 What is a restore? 12 What is an archive? 12 B Backup with USB stick 15 C Control elements 18 Conventions used 7 D Device replacement 34 Differences between archive, backup, and restore 12 E E-mail to Lenze 38 Exit program 20 Exiting the program 20 F Feedback to Lenze 38 Function elements 18 Functions of the IPC Backup & Restore 10 L Layout of the safety information 9 M Me
)(('%$&. 38 Your opinion is important to us These instructions were created to the best of our knowledge and belief to give you the best possible support for handling our product. If you have suggestions for improvement, please e-mail us to: feedback-docu@Lenze.de Thank you for your support.
L 39
© 01/2011 ) Lenze Automation GmbH Hans-Lenze-Str. 1 D-31855 Aerzen Germany Service +49 (0)5154 – 82 -0 Lenze Service GmbH Breslauer Straße 3 D-32699 Extertal Germany 00 80 00 / 24 4 68 77 (24 h helpline) ¬ +49 (0)5154 – 82 - 2800 ¬ +49 (0)51 54 / 82-11 12 | Lenze@Lenze.de | Service@Lenze.de Þ www.Lenze.com SHPBCKNREST 13368969 EN 1.
