Owner's manual

Disposal
Motor
9
l
55
BA 13.0009 − EN 2.1
9 Disposal
9.1 Motor
Item Material
A − bearing shield
Aluminium (partly pressure die casting, partly zinc pressure die casting for
motor type 13.12L.35)
B − bearing shield
Aluminium − pressure die casting (zinc pressure die casting for motor type
13.12L.35)
l Stator:
– Housing
– Housing 13.71L, 13.12L
– Laminated core
– Winding
– Isolation
– Terminal box
– Panel
– Terminal board
– Control wires
– Tube
– Seals
– Brush rocker
– Carbon holder
– Carbon brushes
– Tensioning belt
– Collector
– Aluminium pressure die casting
– Steel
– Dynamo sheet metal
– Enamel−insulated copper wire
– Polyamide, epoxy resin, paper
– Aluminium pressure die casting
– Glass−fiber reinforced polyamide
– Polyester
– Copper with EVA or PTFE coating
– Soft PVC
– NBR or paper
– Glass−fiber reinforced polyester
– Brass
– Carbon, graphite, copper, possibly synthetic resin
– Steel
– Copper, steel, pheno resin
l Rotor
– Shaft
– Laminated core
– Squirrel cage
– Steel
– Dynamo sheet metal
– Aluminium or silumin (AlSi12)
l Steel coat
– Magnet segments
– Steel
– Strontium ferrite
Bearings, discs, screws Steel
9.2 Gearbox
Item Material
SSN31, SSN40 and 12.130
SPL42 − SPL120
Aluminium
Steel
Cover Aluminium
Flange SSN25, SSN31, SSN40 Aluminium
Shaft Steel
Gearing parts Steel (worm gears: bronze)
Bearings, discs, screws Steel
B−sided built−on accessories See corresponding Operating Instructions