Safety Information

BST Testing (Shenzhen) Co.,Ltd. Report No.: BSTXD21052021096301SR
No.7, New Era Industrial Zone, Guantian, Bao’an District, Shenzhen, Guangdong, China.
Tel: [phone] E-mail:[e-mail] Complaints hotline:[phone] http://www.bst-lab.com
Page 8 /
14
12 TABLE: Resistance to heat and fire - Glow wire tests
Object/
Part No./
Material
Manufacturer/
trademark
Glow wire test (GWT); (°C) Verdict
650
te ti
PCB
Refer to attachment 1 <30S - P
Plastic for
enclosure
Refer to attachment 1 <30S - P
Plastic for cap
Refer to attachment 1 <30S - P
Plastic for cover
Refer to attachment 1 <30S - P
Bobbin
Refer to attachment 1 <30S - P
13 TABLE: tests of fault conditions (with PCB No.1)
Part Simulated fault Result Hazard
BR Shorted-circuit *) Fuse resistor broken, nothing impairs safety. NO
C4 Shorted-circuit No lighting, minor input, nothing impairs safety. NO
R4 Shorted-circuit No lighting, minor input, nothing impairs safety. NO
C7 Shorted-circuit No lighting, minor input, nothing impairs safety. NO
C5 Shorted-circuit No lighting, minor input, nothing impairs safety. NO
IC(3-4) Shorted-circuit No lighting, minor input, nothing impairs safety. NO
11 TABLE: Ball Pressure Test of Thermoplastics
Allowed impression diameter (mm) ................ :
2mm
⎯
Object/ Part No./ Material Manufacturer/
trademark
Test temperature (°C)
Impression diameter (mm)
PCB
Refer to
attachment 1
151 1,0
Bobbin
Refer to
attachment 1
151 1,1
Plastic for cap
Refer to
attachment 1
125 1,0
Plastic for enclosure
Refer to
attachment 1
125 1,0
Plastic for cover
Refer to
attachment 1
125 1,0
Supplementary information:--