Safety Information

BST Testing (Shenzhen) Co.,Ltd. Report No.: BSTXD21052021096301SR
No.7, New Era Industrial Zone, Guantian, Bao’an District, Shenzhen, Guangdong, China.
Tel: [phone] E-mail:[e-mail] Complaints hotline:[phone] http://www.bst-lab.com
Page 4 /
14
4 GENERAL REQUIREMENTS
4.1 The lamp shall be so designed and constructed that
in normal use cause no danger to the user.
P
4.2 Self-ballasted LED-Lamp are non-repairable. P
5 MARKING
5.1 Mandatory marking P
- mark of origin LMH P
- rated supply voltage (V) ........................................ : 110-240 P
- rated wattage (W) .................................................. : 20 P
- rated frequency (Hz) .............................................. : 50/60 P
5.2 Addition marking P
- rated current (A) .................................................... : 3.0 P
- weight significantly higher P
- special conditions or restrictions P
Not suitable for dimming; symbol used NA
- not suitable for water contact P
5.3 Marking durable and legible P
rubbing 15 s water, 15 s petroleum; marking legible P
6 INTERCHANGEABILITY
6.1 Cap interchangeability in accordance with IEC 60061-1 P
Gauge in accordance with IEC 60061-3 P
6.2 Bending moment and mass imparted by the lamp at the lampholder
Bending moment imparted by the lamp at the
lampholder (Nm) .................................................... :
NA
Mass not exceeding value table 2 or as specified in
IEC 60061-1 (kg) .................................................... :
NA
7 PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS