® COMPACT DISC PLAYER WITH AM/FM CLOCK RADIO MODEL CDR-190 OPERATING INSTRUCTIONS PLAYS ALL MUSIC COMPACT DISCS FULLY PROGRAMMABLE CD PLAYER WITH REPEAT RECEIVES AM/FM BROADCASTS WAKE UP TO CD, RADIO OR ALARM EASY TO SET CLOCK BATTERY BACK-UP (9V BATTERY NOT INCLUDED) PLEASE READ CAREFULLY BEFORE USE CDR190B(SN)112799 E
SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER S E RVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.
SAFETY INSTRUCTIONS 14. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 15. Damage Requiring Service - The appliance should be serviced by qualified service personnel when: A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or C. The appliance has been exposed to rain; or D.
1. Setting the Clock CLOCK SETTING BUTTONS CLOCK DISPLAY 1 CD DISPLAY Connect the AC power cord into a live wall outlet. Clock display will flash. 2 TIM E H OUR 3 TIM E M IN UTE If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. This plug is polarized and only fits one way into the wall outlet and the back of the set. Hold the Time Button down, and press the Hour Button, until the right hour time shows in the display.
2. Playing a CD Play Button PUSH CLOSE CD Door Open Button Connect the AC power cord (see Setting the Clock). 1 2 3 4 Slide the Function Switch to CD position, and the Mode Switch to ON position. PUSH OPEN Press the CD Door Open Button to open the CD Door and place the CD in the CD compartment. The label side of the CD should face upward. Close the CD Door by pushing it down at the position marked PUSH CLOSE. Auto Lamp Mode Switch Function Switch Press the CD Play Button.
3. More about CD operation Use these buttons for additional operations Open Button CD Track Tip When CD play is paused, the CD track number will flash and no music will play. To resume play, press the Pause Button again, CD track number will stop flashing and music will play. Volume Control To Press or Adjust Adjust the volume Volume Control Stop playback Pause playback CD track number will flash during pause. Press again to resume play after pause.
4. Playing CD tracks repeatedly (Repeat Play) Program/ Repeat Button Play/Program Lamp Repeat Lamp Mode Switch Function Switch 1. Slide the Function Switch to CD position, and the Mode Switch to ON position. 2. Press (Play Button). 3. Press the CD Prog/Repeat Button. To repeat Press (during play) Repeat Lamp a single track (song) Press the Prog/Repeat Button once Steady on all the tracks (all songs) Press the Prog/Repeat Button twice Flashing 4.
5. Playing CD in programmed or random order 1. Programmed Play Program/Repeat Random You can make a program of up to 16 tracks in the order you want them to be played. 1. Slide the Function Switch to CD position, and Mode Switch to ON. Make sure the CD is stopped. 2. Press the Program Button. The letters P1 will show and the Play/Program Lamp will flash. 3. Press or to select the tracks you want to program in the order you want. 4. Press the Program Button to confirm.
6. Listening to the radio AUTO LAMP VOLUME MODE SWITCH FUNCTION SWITCH BAND SWITCH TUNING CONTROL Connect the supplied AC power cord (see Setting the Clock). 1 2 3 Slide the Function Switch to RADIO, and the Mode Switch to ON position. Slide the Band Switch to the proper band position that you want. Tune into the station you prefer using the Tuning Control. Adjust for the clearest sound. 4 Adjust the Volume Control for desired loudness.
7. More about radio operation Phones Jack FM antenna Battery Compartment To improve broadcast reception Fully stretch out the FM antenna for FM reception. Reorient the player itself for AM reception. Or locate the set near a window. To listen without disturbing others Connect a headphone (optional - not included) into the Phones Jack at the back of the set. The speaker will automatically be silenced. Remember to unplug the headphones if you want the set to wake you up in the morning.
8. Waking up to alarm or music 1. Set Alarm Time 1. Hold the Alarm button. 2. Press the Hour button to select correct hour time. Release the Hour Button but continue to press the Alarm Button. ALAR M 3. Press the Minute button for correct minute time. Release both buttons. H OUR M IN UTE NOTE: PM Indicator will be on for PM time. To change to AM time, advance time 12 hours. 2. Waking up to alarm AUTO AL ARM ON Set the Mode Switch to ALARM position. Auto Lamp will be on.
9. Snooze and Sleep functions When alarm or music comes on 1. To sleep extra 9 minutes ALARM Just press the Snooze Button, the alarm or music will stop and come on after 9 minutes. 2. To stop the alarm or music Just press the Alarm Button, the alarm or music will stop and come on next day. SN OO ZE Going to Sleep with music 1. Make sure Mode Switch is set to AUTO or ALARM position. 2. Set the Function Switch to CD or RADIO as you prefer. AUTO AL ARM CD OFF ON RADIO 3.
Precautions On safety As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only. Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualified personnel before operating it any further. On power sources For battery backup, you may use a 9V battery (optional), so that you will not have to re-set the clock every time you disconnect the power.
Precautions (continued) Notes on CDs Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. Cleaning the lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner blower or a cotton swab. Do not use solvents such as benzene, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
General Troubleshooting Problem Remedy The power is not on. the AC power cord to a wall Connect outlet securely. Make sure that outlet has power. sure the Function Switch is at the Make right position as you want. There is no sound. Adjust the volume. the headphones when listening Unplug through speakers. appears in the display even when a CD is in place. Insert the CD with the label side up. CD player sure that the CD compartment is Make closed. CD does not play.
Specification GENERAL DESCRIPTION Power source: AC 120V, 60Hz 10Watts DC 9V (optional - for clock backup) Speakers: 2-4 8 ohm Output power: 1.5W Dimensions: Width: 10 1/ 2 Depth: 6 1/ 4 Height: 4 Weight: 7 LBs (without battery) CD SECTION Plays disc type: Any compact discs bearing this logo Laser wavelength: 760 - 800 NM Tracking method: 3 - spot error detection Frequency response: 80 Hz - 15 KHz RADIO SECTION Frequency range: FM: 88 - 108 MHz 3.
