AM/FM STEREO RADIO PROGRAMMABLE CD PLAYER MODEL CD-625 OPERATING INSTRUCTIONS BUILT-IN AM/FM RADIO RECEIVER PLAYS MUSIC COMPACT DISCS 6 DIGIT LCD VISUAL DISPLAY TRACK REPEAT & DISC REPEAT BASS BOOST SYSTEM DELUXE STEREO HEADPHONES INCLUDED USES 2 SIZE AA BATTERIES (NOT INCLUDED) PLEASE READ CAREFULLY BEFORE USE IB-CD625(CDR92C-0L8)-WM-E-121803 IB-CD625(CDR92C-0L8)-WM-E-121803.
LOCATION OF CONTROLS 1 4 13 2 3 12 11 10 5 6 9 8 7 20 14 15 19 18 17 16 1.CD PROGRAM BUTTON ( ) ) 2.CD BACKWARD SKIP/SEARCH BUTTON ( 3.CD STOP AND POWER OFF BUTTON ( ) 4.CD DOOR 5.AM/FM DIAL LENS 6.CD DOOR OPEN BUTTON 7.AM/FM TUNING CONTROL 8.POWER ON INDICATOR 9.CD/OFF/RADIO FUNCTION SWITCH 10.CD PLAY/PAUSE AND POWER ON BUTTON ( ) ) 11.CD FORWARD SKIP/SEARCH BUTTON ( 12.CD REPEAT BUTTON ( ) 13.CD LCD VISUAL DISPLAY 14.BATTERY DOOR 15.BASS BOOST SWITCH 16.FM STEREO INDICATOR 17.
POWER SOURCES Power this player by connecting an optional (not included) AC ADAPTOR or by inserting 2 size AA fresh alkaline batteries. NOTE: Before you buy an AC Adaptor, please note the only AC ADAPTOR suitable for , others may damage the this player is DC 4.5V 600mA, with polarity player. Please check voltage & current (mA) before buying an AC ADAPTOR. Using with Batteries Insert two size AA alkaline batteries according to the + and - markings on the bottom of the set.
DISC PLAYING 1 Slide the CD/OFF/RADIO FUNCTION switch to CD position. CD/OFF/RADIO FUNCTION SWITCH 2 Load the disc. Push here Disc 1234 1234 1234 1234 1234 3 SLIDE TO OPEN LABEL SIDE UP Connect the headphones. STEREO HEADPHONES TO PHONES JACK 4 Press the PLAY/PAUSE button ( indicator will light up. ), the POWER ON PLAY/PAUSE BUTTON 5 TRACK NUMBER CURRENTLY PLAYING POWER ON INDICATOR ELAPSED PLAYING TIME OF THE CURRENT TRACK Adjust the volume.
OTHER OPERATIONS Operation To pause play To release pause and resume play Display window shows Press PLAY/PAUSE button PLAY/PAUSE button To stop play TRACK NUMBER CURRENTLY PLAYING ELAPSED TIME FLASHES TRACK NUMBER CURRENTLY PLAYING PLAYING TIME ADVANCES STOP button TOTAL TRACKS TOTAL PLAYING TIME Slide the CD/OFF/RADIO FUNCTION switch to OFF position, or press the STOP button quickly twice.
REPEAT, INTRO AND RANDOM PLAY You may have repeat, intro or random play using the REPEAT button. Press the REPEAT button several times, and the display will show the followings in turn: REPEAT ONE REPEAT ALL INTRO RANDOM NORMAL PLAY SINGLE TRACK REPEAT Plays one song over and over till you press STOP. SKIP/SEARCH SKIP/SEARCH During play, select the song you want to repeat with or ), either of the SKIP/SEARCH buttons ( then press the REPEAT button once, the symbol REPEAT ONE appears in the display.
PROGRAMMED PLAY The tracks (songs) on the disc can be programmed (arranged in advance) to play in any order you prefer (up to 20 tracks can be programmed). Programming Example Program Number 1 2 3 4 5 6 7 8 etc. Track Number (song number) 3 5 8 1 2 4 1 1 etc. During programming, the word PROGRAM flashes in the display. To program songs to play in your preferred order, follow steps below: 1. Press the PROGRAM button once. 3. Press the PROGRAM button to confirm.
RADIO OPERATION 1 Slide the CD/OFF/RADIO FUNCTION switch to RADIO position, the POWER ON indicator will be turned on. CD/OFF/ RADIO FUNCTION SWITCH POWER ON INDICATOR 2 Select AM, FM or FM STEREO with the AM/FM/FM STEREO AM/FM/FM STEREO BAND switch. BAND SWITCH 3 Rotate the TUNING CONTROL to select your favorite radio station. NOTE: If you tune into an FM stereo station, the FM STEREO indicator will be turned on. 4 FM STEREO INDICATOR AM/FM DIAL LENS TUNING CONTROL Adjust the volume.
MAINTENANCE Cleaning the lens Handling Compact Discs Dirty, scratched or warped discs A dirty lens will cause sound skipping. If the lens is very dirty, the player may not work. We suggest using a special cleaning disk (not included) available in most music and Hi-Fi stores. However, if you do not have one, you may use the instructions below. Use a cotton swab very slightly dampened with alcohol to clean the lens. Cleaning the cabinet Wipe with a soft cloth.
SAFETY PRECAUTIONS Do not take the set apart. The laser beam used in the set may harm your eyes. Refer servicing to qualified service personnel only. Do not insert pins or coins, clips, or any objects inside the set. This set is equipped with a safety device which automatically turns the laser beam off when the disc door is opened. Do not drop the set or subject it to strong shocks. Doing so could result in damage.
IMPORTANT INFORMATION REQUIRED BY THE FCC Since the CD circuitry may cause interference to other radios nearby, switch this set off when not in use or move it away from the affected radios. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation.
TROUBLE SHOOTING GUIDE Symptoms Tracks do not change or set does not play normally. Causes Solutions Batteries are weak (they may test OK on tester but they are weak for CD operation). Dead or weak batteries. CD Player will not turn on. The optional AC ADAPTOR not connected properly. Disc will not play. Replace both batteries with fresh alkaline batteries.
TECHNICAL SPECIFICATIONS CD Player Section Frequency response .............................. Sampling frequency ................................ D/A converter ......................................... Error correction method .......................... Pickup ................................................... 50Hz - 15kHz +1/-2dB 44.1kHz 1-bit CIRC Optical 3-beam semiconductor laser (780 nm wavelength) Laser diode material GaAIAs Laser output less than 44.
LIMITED WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a period of 90 days after purchase and we will repair it free of charge or replace it at no charge, should it become defective under this warranty, providing you submit proof of purchase (sales slip) with the set. During the initial 90 day period after original purchase, we will service or exchange, at no charge, the set that is returned to LENOXX ELECTRONICS CORP.
