COMPACT DISC PLAYER WITH AM/FM RADIO MODEL CD-1095 OPERATING INSTRUCTIONS • • • • • • PLAYS MUSIC COMPACT DISCS FULLY PROGRAMMABLE CD PLAYER WITH REPEAT PLAY RECEIVES AM/FM BROADCASTS POWER LED INDICATOR 2 WAY POWER - AC/DC REQUIRES 6 SIZE “C” BATTERIES (not included) PLEASE READ CAREFULLY BEFORE USE IB-CD1095(TA)-WM-E-123003 IB-CD1095(TA)-WM-E-123003.
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4.
BATTERY SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions.
CHOOSING THE POWER SOURCES You can use the AC power or batteries as a power source. To a wall outlet NOTE: One blade of the plug and outlet is wider. AC SOCKET • • Replac e the bat t eries when the POWER lamp dims or when the player stops operating. Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the player and remember to check the Battery Safety Instructions on Page 3. 1.
PLAYING A CD OPEN THE CD DOOR BY LIFTING HERE FUNCTION SWITCH (at the left side of the set) PLAY/PAUSE Connect the supplied AC power cord or batteries (see page 4). 1 2 3 4 S li de t he FUNCT I ON switch (at the left side of the set) to CD position, the POWER lamp will turn on . POWER lamp Lift the right corner of the CD DOOR to open it and pla c e a CD i n t he CD compartm ent . The label side of the CD should face upward. Close the CD DOOR by pus hing it d own.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME CONTROL OPEN THE CD DOOR BY LIFTING HERE PHONES JACK FUNCTION SWITCH (at the left side of the set) STOP BACKWARD TIP When CD play is paused, the PLAY/ PA U S E la m p w ill flash and no music will play. To res um e pl ay, pre s s t h e P L AY / PA US E but t on agai n, t he P LAY / PA U S E la m p w ill s top flas hing and music will play. TIP If you bump the set during CD play, the music will stop or s k ip f or a f ew s ec onds .
PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY) You can play CD tracks over and over in normal or programmed play modes (see page 8). PLAY/PAUSE FUNCTION SWITCH (at the left side of the set) REPEAT BUTTON PROGRAM BUTTON FORWARD BACKWARD 1. Slide the FUNCTION switch (at the left side of the set) to the CD position. 2. Select the track by pressing SKIP/SEARCH BACKWARD or FORWARD , and then press . 3. Press the CD REPEAT button.
SELECTING YOUR OWN MUSIC PLAYING ORDER (Programmed Play) You can make a program of up to 20 tracks in the order you want them to be play ed. PROGRAM BUTTON PROGRAM LAMP PLAY/ PAUSE 1. Slide the FUNCTI O N s witc h to CD pos i tion. Make sure the CD is stopped. 2. Pre s s th e P R OGRA M b utt on. Th e l ett er “ 3. 4. 5. 6. PROGRAM REPEAT ” and the PROGRAM lamp will flash in the display. or to select the tracks you want to Press program in the order you want.
LISTENING TO THE RADIO FUNCTION SWITCH (at the left side of the set) TUNING CONTROL BAND SWITCH Connect the supplied AC power cord or batteries (see page 4). 1 Slide the FUNCTION switch (at the lef t side of t he s et) t o RA DI O position, the POWER lamp will turn on . 2 Slide the BAND switch (at the right side of the set) to the proper band position (AM or FM) that you want. 3 Tune into the station you prefer using the TUNING control. Adjust for the clearest sound. 9 IB-CD1095(TA)-WM-E-123003.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME CONTROL FUNCTION SWITCH (at the left side of the set) TIP • Next time you want to listen to the radio, just s lide t he FUNCTI ON s wi t c h to RA DI O pos it ion . Th e pla y er aut om at i c all y s t a rt s playing the previously tuned station.
PRECAUTIONS On Safety • On Power Sources • For battery operation, use 6 size “C” As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble t he c ab inet . Ref er s erv i c ing t o qualified personnel only. • • Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualified personnel bef ore operating it any further. bat teries . We recom mend alk aline batteries for longer life.
PRECAUTIONS (continued) Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. MAINTENANCE Cleaning the Lens I f the lens becom es dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower. not use solvents such as benzine, • Do thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
TROUBLE SHOOTING Remedy Problem • Connec t t he AC power cord t o a wall outlet securely. • M ak e s u re t he ba t t er ies a re i ns er t ed General The power is not on. correctly and they are fresh. • Make s ure the FUNCTION switch is at the right position as you want. • Adjust the volume. • Unplug the headphones when list ening There is no sound. through speakers. CD player ” appears in the display “ even when a CD is in place. CD does not play. condensation.
SPECIFICATION General Description Power source: AC 120V, 60Hz, 14Watts DC 9V (6 size “C” batteries) (Alkaline batteries are recommended) Speakers: 2 - 3 ” 8 ohm Output power: 1.5W/channel Dimensions: Width: 12” Depth: 10” Height: 6” Weight: 3.3LBs (without batteries) CD Section Plays disc type: Any normal CD used in portable players Laser wavelength: Tracking method: 760 - 800 NM 3 - spot error detection 3.
