Download

10
Fig.6
6. Slide battery into main handle until release button “snap” together.
(Note: Fully charge the battery before first use.) (See Fig.7)
Fig.7
SAW CHAIN TENSION
WARNING: Remove battery pack from pole saw before servicing. Severe injury or
death could occur from body contact with moving chain.
WARNING: Cutting edges on chain are sharp. Use protective gloves when handling
chain.
WARNING: When cleaning saw body,
• do not submerge saw in any liquids
• do not use products that contain ammonia, chlorine, or abrasives
• do not use chlorinated cleaning solvents, carbon tetrachloride, kerosene, or
gasoline
(Note: The saw chain tension is properly set at the factory. A new chain will stretch.
Check new chain tension frequently (after disconnecting battery) during the first 2 hours