ThinkVision X24 User’s Guide
Product numbers 60CF-GAR1-WW First Edition (November 2014) © Copyright Lenovo 2014. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
Contents Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii General Safety guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Chapter 1. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety information General Safety guidelines For tips to help you use your computer safely, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information.
Chapter 1. Getting started This User’s Guide provides detailed operation instructions for the user. For quick instruction overview, please see the Setup Poster for brief information. Shipping contents The product package should include the following items: • Information Flyer • Flat Panel Monitor • Power Cord & Adapter • HDMI Cable (Optional) • DP Cable • Base HDMI Chapter 1.
Notice for use To set up your monitor, please see the illustrations below. Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure. 1. Place your monitor with the screen face down on a soft flat surface. 2. Align the base assembly bracket to the monitor. 3. Insert the bracket towards monitor until it locks in place. Chapter 1.
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. Chapter 1.
Monitor controls The keypad controls on the panel frame are accesses to various functions. For information on how to utilize these keypad controls, please see "Adjusting your monitor image"on page 2-3. Chapter 1.
Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information on page iii before carrying out this procedure. 1. Power off your computer and all attached devices, then unplug the computer power cord. 2. Connect the cables according to below icon indication. 3. Connect one end of the DP cable to the DP connector on the back of the computer, and the other end to the DP connector on the monitor.
4. Connect one end of the HDMI cable to the HDMI connector on the back of the computer, and the other end to the HDMI connector on the monitor. Lenovo recommends that customers who require to use the HDMI input on their monitor purchase the “Lenovo HDMI to HDMI cable OB47070”. www.lenovo.com/support/monitoraccessories 5. Insert the Adapter cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets. Chapter 1.
6. Power on the monitor and the computer. Chapter 1.
7. When you install the monitor driver, download the driver that corresponds to your monitor model from the Lenovo website http://support.lenovo.com/us/en/documents/X24A. Refer to the “"Manually installing the monitor driver"on page 3-5” section to install the driver.. Registering your option Thank you for purchasing this Lenovo™ product. Please take a few moments to register your Product and provide us with information that will help Lenovo to better serve you in the future.
Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer.
The following are some other tips for comfortable viewing of your monitor: • Use adequate lighting for the type of work you are performing. • Use the monitor brightness, if equipped to optimize the image on your screen to meet your visual preferences. • Keep your monitor screen clean so you can focus on the screen’s contents. Any concentrated and sustained visual activity can be tiring for your eyes.
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls Icon Control Input Source Switches the video input source DP select Press and hold for 5 seconds to switch DP version between DP 1.1 and DP 1.2.
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. To use the controls: 1. Press to open the brightness menu. 2. Press to make adjustments for the brightness grade then press 3. Press and hold 4. Press and hold 5. Enables DDC/CI by default. Press and hold to save. for 5 seconds to switch DP version between DP 1.1 and DP 1.2. for 3 seconds to display the information about MNT.
Selecting a supported display mode The display mode of the monitor uses is controlled by the computer. Therefore, refer to your computer documentation on how to change display modes. The image size, position and shape might be changed when the display mode changes. This is normal and the image can be re-adjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free.
Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. Table 2-3.
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment. • Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen. • Use any cleaner which contains an anti-static solution or similar additives.
Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model 60CF-GAR1-WW Dimensions Depth 220.0 mm (8.66 in.) Height 412.8 mm (16.25in.) Width 540.9 mm (21.30in.) Stand Tilt Range: -5° ~ 22° Image Viewable image size 604.7 mm (23.8 in.) Maximum height 296.46 mm (14.67 in.) Maximum width 527.
Table 3-1.
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The image quality is unacceptable. The video signal cable is not connected with the monitor or system completely. Be sure the signal cable is firmly plugged into the system and monitor.
Table 3-2. Troubleshooting Problem • Fuzzy lines in text or a blurry image. • Horizontal or vertical lines through the image. Possible cause • Image setup has not been optimized. • Your system Display Properties setting have not been optimized. Suggested action Reference Adjust the resolution settings on your system to match the native resolution for this monitor: 1920 x 1080 at 60 Hz. "Adjusting your monitor image"on page 2-3 Perform automatic image setup.
Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft Windows 8/8.1. Installing the monitor driver in Windows 7 To use the Plug and Play feature in Microsoft Windows 7, do the following: 1. Turn off the computer, all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 7 operating system. 4.
Installing the monitor driver in Windows 8/8.1 To use the Plug and Play feature in Microsoft Windows 8/8.1, do the following: 1. Turn off the computer, all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 8/8.1 operating system. 4. From the Lenovo website http://support.lenovo.
Service information Customer responsibilities The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications. The following are examples of misuse or abuse and not covered by warranty: • Images burned onto the screen of a CRT monitor.
Appendix A. Service and Support The following information describes the technical support that is available for your product, during the warranty period or throughout the life of your product. Refer to the Lenovo Limited Warranty for a full explanation of Lenovo warranty terms. Registering your option Register to receive product service and support updates, as well as free and discounted computer accessories and content. Go to: http://www.lenovo.
Country or Region Telephone Number Brazil Calls made from within the Sao Paulo region: 11-3889-8986 Calls made from outside the Sao Paulo region: 0800-701-4815 (Portuguese) Brunei Darussalam Dial 800-1111 (English) Canada 1-800-565-3344 (English, French) Chile 800-361-213 (Spanish) China Technical Support Line: 400-100-6000 (Mandarin) China (Hong Kong S.A.R.) (852) 3516-8977 (Cantonese, English, Mandarin) China (Macau S.A.R.
Country or Region Telephone Number Guatemala Dial 999-9190, wait for operator, and request to reach 877-404-9661 (Spanish) Honduras Dial 800-0123 (Spanish) Hungary +36-13-825-716 (English, Hungarian) India Primary: 1800-419-4666 (Tata) Secondary: 1800-3000-8465 (Reliance) Email: commercialts@lenovo.
Country or Region Telephone Number Panama Lenovo Customer Support Center: 001-866-434 (toll-free) (Spanish) Peru 0-800-50-866 OPCION 2 (Spanish) Philippines 1-800-8908-6454 (GLOBE subscribers) 1-800-1441-0719 (PLDT subscribers) (Tagalog, English) Poland Laptops and tablets branded with logo Think: 48-22-273-9777 ThinkStation and ThinkServer: 48-22-878-6999 (Polish, English ) Portugal 808-225-115 (Standard Charges Apply) (Portuguese) Romania 4-021-224-4015 (Romanian) Russia +7-499-705-6204 +7-
Country or Region Vietnam Telephone Number 120-11072 (Toll Free) 84-8-4458-1042 (Standard Charges Apply) (Vietnamese, English) Appendix A.
Appendix B. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Recycling information Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to: http://www.lenovo.
Appendix C. Color Temperature Control ThinkVision X24 color default is 6500K, you can select 9300K or user mode via PC/laptop. Preparation 1.Download the mControl from web site http://www.entechtaiwan.com/files/mc_setup.exe 2.PC&Laptop. 3.Connect PC&Laptop and ThinkVision X24 monitor with DP&HDMI cable. You can visit the following website and download a tools with color temperature adjustment function: http://www.entechtaiwan.com/files/mc_setup.
Step 1.Install the mControl then it will have the ICON on the screen. 2.Double Click the mControl to run the program. 3.The program will be shown as below. 4.Make sure the product name is Lenovo X24A. 5.Find the Color item, select 6500K, 9300K or custom1 (user mode). Appendix C.
6.When you choose Custom1, you can define color temperature by yourself. Appendix C.
Appendix C.
