Owner's manual

IPCong=9.44.72.36
StartNet=Yes
SubnetMask=255.255.255.128
4.Getthe\PREBOOT\SWWORKNETSTART.TBIlebyusingtheRRUTILprocessdescribedin“Using
RRUTIL.EXE”onpage26.
5.Change
factory-minint
to
factory-winpe
6.Commentoutthefollowinglines:
regsvr32/snetcfgx.dll
netcfg-v-winpe
netstartdhcp
netstartnla
7.Putthe\SWWORK\NETSTART.TBIand\MININT\SYSTEM32winbom.inilesbackbyusingtheRRUTIL
processdescribedin“UsingRRUTIL.EXE”onpage26
.
Note:ThedefaultenvironmentsupportsonlytheDHCPenvironment.
ThefollowingtableprovidestheentryanddescriptionforIPcongurations:
Table20.StaticIPaddressentries
EntryDescription
Gateway
SpeciestheIPaddressofanIProuter.Conguringadefaultgatewaycreatesa
defaultrouteintheIProutingtable.Syntax:
Gateway=xxx.xxx.xxx.xxx
IPCongSpeciestheIPaddressthatWindowsPEusestoconnecttoanetwork.
Syntax:IPCong=xxx.xxx.xxx.xxx
StartNet
Specieswhethertostartnetworkingservices.Syntax:StartNet=Yes|No
SubnetMask
Speciesa32-bitvaluethatenablestherecipientofIPpacketstodistinguish
thenetworkIDandhostIDportionsoftheIPaddress.Syntax:SubnetMask=
xxx.xxx.xxx.xxx
Changingthevideoresolution
YoucanchangethevideoresolutionbychangingthedefaultPredesktopArearesolutionsettingsof800×
600×16-bit.Tochangethesettings,completethefollowingprocedures:
1.Getthe\MININT\SYSTEM32\WINBOM.INIlebyusingtheRRUTILprocessdescribedin“Using
RRUTIL.EXE”onpage26.
2.Opentheleforediting.
3.Addthefollowingentries:
[ComputerSettings]
DisplayResolution=800x600x16or1024x768x16
WhentheRescueandRecoveryenvironmentstarts,youseeanadditionalwindowduringstartupthatis
titled“Factorypreinstallation”.Thecolorsarereducedfromthousandsto256.
4.Putbackthe\MININT\SYSTEM32\WINBOM.INIlebyusingtheRRUTILprocessdescribedin“Using
RRUTIL.EXE”onpage26.
Startupapplications
TheRescueandRecoveryWindowsPEenvironmenthastheabilitytosupportastartupscripts,programs,
orcustomizedprograms.ThesescriptsorprogramswillbeprocessedbeforetheRescueandRecovery
WindowsPEenvironmentreachesthemainPEinterfacepage.
Chapter3.Congurations41