User Guide

The rear of the ThinkSystem DE6000F 2U SFF controller enclosure includes the following components:
Two redundant hot-swap controllers, each with the following ports:
One slot for the host interface card (a host interface card is required)
Note: The DE6000F Gen2 controllers no longer offers base ports
Two 12 Gb SAS x4 expansion ports (Mini-SAS HD SFF-8644) for connections to the
expansion enclosures.
One RJ-45 10/100/1000 Mb Ethernet port for out-of-band management.
Note: The Ethernet port (P2) next to the GbE management port is not available for use.
Two serial console ports (RJ-45 and Micro-USB) for another means to configure the system.
One USB Type A port (reserved for factory use)
Two redundant hot-swap 913 W AC (100 - 240 V) power supplies (IEC 320-C14 power connector)
with integrated cooling fans.
The following figure shows the rear of the ThinkSystem DE240S 2U SFF expansion enclosure.
Figure 4. ThinkSystem DE240S 2U SFF expansion enclosure rear view
The rear of the ThinkSystem DE240S 2U SFF expansion enclosure includes the following components:
Two redundant hot-swap I/O Modules; each I/O Module provides four 12 Gb SAS x4 expansion ports
(Mini-SAS HD SFF-8644) for connections to the controller enclosures and for connecting the
expansion enclosures between each other.
Two redundant hot-swap 913 W AC (100 - 240 V) power supplies (IEC 320-C14 power connector)
with integrated cooling fans.
Lenovo ThinkSystem DE6000F All Flash Storage Array 4