Specifications

Table 31. Removal steps of base cover and USB sub card with cable (continued)
5
6
a
For discrete graphics models: When you are servicing, make sure that the
thermal rubber for FET is firmly attached on the system board as shown in a.
When replacing the rubber, you need to peel the thin film off from the bottom,
and attach it to the system board.
Step Screw (quantity) Color Torque
5 M2 × 3 mm, small-head, nylon-coated (1) Black 0.167 Nm
(1.7
kgfcm)
ThinkPad T61 and T61p (15.4-inch widescreen) 97