Specifications
Table Of Contents
- Contents
- About this manual
- Safety information
- Important service information
- General checkout
- Related service information
- Lenovo IdeaPad S400 Touch
- Specifications
- Status indicators
- Hotkeys
- FRU replacement notices
- Removing and replacing an FRU
- 1010 Battery pack
- 1020 Hard disk drive
- 1030 DIMM
- 1040 PCI Express Mini Card for wireless LAN/WAN
- 1050 Fan assembly and Heat Sink assembly
- 1060 Keyboard
- 1070 System board
- 1080 LCD unit
- 1090 Speakers, base cover, USB board, power assembly and power board
- 1100 LCD front bezel
- 1110 LCD panel, LCD cable
- 1120 Integrated camera
- Locations
- Parts list
- Notices
Lenovo IdeaPad S400 Touch
37
1030 DIMM
For access, remove this FRU:
• “1010 Battery pack” on page 33
Figure 3. Removal steps of DIMM
Release the two latches on both edges of the socket at the same time in the
direction shown by arrows , and then unplug the DIMM in the direction
shown by arrow .
When installing: Insert the notched end of the DIMM into the socket. Push the
DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly
fixed in the slot and difficult to be moved.
a
b
aa
b