Operation Manual
Chapter 2: Installing the Application
SecureMind Surveillance Manager
Page 8
2.1.3 NAS Device Models
The following are the NAS device models that are required for installing the SecureMind Surveillance
Manager application:
ix2-200 NAS Device Cloud Edition
ix4-200d NAS Device Cloud Edition
px4-300d NAS Device
px6-300d NAS Device
px12-350r NAS Device
px4-300r NAS Device
ix2 NAS Device
ix4-300d NAS Device
px2-300d NAS Device
Note: Ensure that the NAS device firmware is updated to the latest version available before
installing SecureMind Surveillance Manager.
2.2 Installing SecureMind Surveillance Manager Application
This section describes the process to install the SecureMind Surveillance Manager application using the
Application Manager of the NAS device. The Application Manager can be launched using the Web
browser.
For NAS device firmware version 3.2.x, if the devices are shipped with hard disks then the application will
be pre-installed at the factory. If the devices are shipped without the hard disks (that have been factory
reset) then the application is not available. But, it will have SecureMind Surveillance Manager icon. You
must click on the icon to install the application.
Note: If the Internet connection is available, then the application will install automatically. If there is
no Internet connection, then you must download the application from the
www.securemind.mindtree.com Web site using a different system and install it.
Prerequisite:
Ensure that the media plugin for Mozilla Firefox is enabled for the VLC installation. This enables you
to view the live and playback video on Firefox browser.
To install the SecureMind Surveillance Manager application on the NAS device using the
installation file, perform the following:
Note: You must have administrator privileges for the NAS device to install the SecureMind
Surveillance Manager application.
1. On the Web browser (Internet Explorer or Mozilla Firefox), enter the URL of the NAS device. The NAS
device home page is displayed.