Operation Manual

Chapter 4: Configuring the Application
SecureMind Surveillance Manager
Page 64
3. Select Enable Camera Occlusion / Scene Change alerts for this camera to enable the camera
occlusion and scene change detection view for the camera.
4. In Minimum Camera Occlusion / Scene Change time, enter the time in seconds (between 10 to
60 seconds) to raise an alert, when the view is obstructed or changed for the specified time.
5. In Minimum Camera Occlusion / Scene Change reset time, enter the time in minutes
(between 5 to 20 minutes) to reset the camera occlusion and scene change condition. After camera
occlusion and scene change detection, the system will start detecting the new scene after the
specified time.
6. Click Apply to save the changes.
4.8.6 Modifying Camera Information
You can modify the camera details such as camera name, manufacturer, model, IP address, and so on.
When you replace an old camera with a new camera, the recordings of the old camera is available even if
you perform a search with the new camera name.
 To modify camera details, perform the following:
1. Go to Settings > Add Camera.
The Choose an option to Add Camera screen is displayed.
2. In the Cameras list, click > Camera Information.
Figure 51. Modify Camera Information