Operation Manual

Chapter 4: Configuring the Application
SecureMind Surveillance Manager
Page 56
Logo Display
 To configure the advertisement display sequence, perform the following:
1. Go to Settings > Device Display > Logo Display.
Figure 45. Logo Display
2. In Show Logo on Live view, select Yes to display the logo on live view and No, if you do not want
to display the logo on live view.
3. Click Upload logo file, to upload a logo file.
4. In Choose quadrant to place the logo, select any of the three quadrants to display the logo.
5. Click Apply to save the settings.
The changes are reflected on the live view screen of the display that is connected to the NAS device.
4.8 Editing Camera Settings
This section describes how to modify the video settings, storage settings, and remote view settings for
each camera.
4.8.1 Video Settings
You can modify the camera codec settings such as compression format, resolution, frame rate, bit rate,
and so on.
 Note: Some of the fields may be read-only or disabled based on the camera model.