User Guide

3
Installing the AA batteries
Pairing the motion controller
To pair the motion controller with the computer, do the following:
1. Remove the battery compartment cover from the motion controller.
2. Turn on the motion controller by pressing and holding the Windows button until the
motion controller vibrates once and the constellation LEDs are solid on.
3. Enable Bluetooth pairing on the motion controller by pressing and holding the pairing
button until the constellation LEDs begin pulsing slowly.
4. Enable Bluetooth pairing on the computer to discover and pair the motion controller.
When connected, the motion controller vibrates once and the constellation LEDs are
solid on.
5. Reinstall the battery compartment cover.