User Guide
Table Of Contents
- Flex System Fabric CN4093 10Gb Converged Scalable Switch Product Guide (withdrawn product)
- Did you know?
- Part number information
- Supported transceivers and cables
- Benefits
- Features and specifications
- Standards supported
- Chassis and adapters
- Connectors and LEDs
- Network cabling requirements
- Warranty
- Physical specifications
- Agency approvals
- Typical configurations
- Related publications and links
- Related product families
- Notices
- Trademarks
Table 9. CN4093 as an NPV Gateway connected to the Brocade SAN (Figure 7)
Diagram
reference
Description Part
number
Quantity
Flex System FCoE solution
Flex System x240 Compute Node or other supported compute node Varies Varies
Flex System CN4054 10Gb Virtual Fabric Adapter 90Y3554 1 per compute node
Flex System CN4054 Virtual Fabric Adapter Upgrade 90Y3558 1 per VFA
Flex System Fabric CN4093 10Gb Converged Scalable Switch 00D5823 2
Flex System Fabric CN4093 Converged Scalable Switch (Upgrade 1)* 00D5845 1 per CN4093
RackSwitch G8264
Brocade SAN fabric
Storage systems
IBM DS3000 / DS5000
IBM DS8000
IBM Storwize V3700 / V5000 / V7000 / SAN Volume Controller
IBM XIV
* The Upgrade 1 might not be needed with flexible port mapping if the total number of the internal and external
ports used on the CN4093 is less or equal to 22.
Table 10. CN4093 as an NPV Gateway connected to the Cisco MDS SAN (Figure 8)
Diagram
reference
Description Part
number
Quantity
Flex System FCoE solution
Flex System x240 Compute Node or other supported compute node Varies Varies
Flex System CN4054 10Gb Virtual Fabric Adapter 90Y3554 1 per compute node
Flex System CN4054 Virtual Fabric Adapter Upgrade 90Y3558 1 per VFA
Flex System Fabric CN4093 10Gb Converged Scalable Switch 00D5823 2
Flex System Fabric CN4093 Converged Scalable Switch (Upgrade 1)* 00D5845 1 per CN4093
RackSwitch G8264
Cisco MDS SAN fabric
Storage systems
DS3000 / DS5000
DS8000
Storwize V3700 / V5000 / V7000 / SAN Volume Controller
XIV
* The Upgrade 1 might not be needed with flexible port mapping if the total number of the internal and external
ports used on the CN4093 is less or equal to 22.
Note: You also need SFP+ modules and optical cables or SFP+ DAC cables (not shown in Table 8 and Table
9; see Table 3 for details) for the external 10 Gb Ethernet connectivity, and SW 8 Gb FC SFP+ transceivers
and optical cables (also identified in Table 3) for the external Fibre Channel connectivity.
Flex System Fabric CN4093 10Gb Converged Scalable Switch (withdrawn product) 24