Operation Manual

24
Chapter 3. Lenovo OneKey Recovery system
3 Follow the on-screen instructions to restore the system partition to its
original status or to a previously created back-up point.
If Windows cannot be started, follow the steps below to start the Lenovo
OneKey Recovery system:
1 Shut down the computer.
2 Press the Novo button. From the Novo Button Menu, select System
recovery and press Enter.
Note:
• The recovery process is irreversible. Make sure to back up any data you wish to save on the
system partition before starting the recovery process.
• The recovery process may take a while. Make sure to connect the AC power adapter to
your computer during the recovery process.
• The above instructions should be followed when Windows can be started normally.
• When the computer is in hibernation status, you can not start the Lenovo OneKey Recovery
system by pressing the Novo button for Windows 7 system.