Computer Hardware User Manual

•FollowthesuggestedactionsintheorderinwhichtheyarelistedintheActioncolumnuntiltheproblemis
solved.
•SeeChapter7“Partslisting,RS210Types6531,6532,6533,and6534”onpage175todeterminewhich
componentsarecustomerreplaceableunits(CRU)andwhichcomponentsareeldreplaceableunits(FRU).
•Ifanactionstepisprecededby“(Trainedservicetechnicianonly),”thatstepmustbeperformedonlyby
atrainedservicetechnician.
ENET[0]DHCP-HSTN=%1,
DN=%2,IP@=%3,SN=%4,
GW@=%5,DNS1@=%6.(%1=
CIM_DNSProtocolEndpoint.Hostname;
%2=
CIM_DNSProtocolEndpoint.DomainName;
%3=
CIM_IPProtocolEndpoint.IPv4Address;
%4=
CIM_IPProtocolEndpoint.SubnetMask;
%5=IPaddress,xxx.xxx.xxx.xxx;%6
=IPaddress,xxx.xxx.xxx.xxx)
Info
TheDHCPserverhas
assignedanIMMIPaddress
andconguration.
Noaction;informationonly.
ENET[0]IP-Cfg:HstName=%1,
IP@%2,NetMsk=%3,
GW@=%4.(%1=
CIM_DNSProtocolEndpoint.Hostname;
%2=
CIM_StaticIPSettingData.IPv4Address;
%3=
CIM_StaticIPSettingData.SubnetMask;
%4=
CIM_StaticIPSettingData.DefaultGatewayAddress)
Info
AnIMMIPaddressand
congurationhavebeen
assignedusingclientdata.
Noaction;informationonly.
LAN:Ethernet[0]interfaceisnolonger
active.
InfoTheIMMEthernetinterface
hasbeendisabled.
Noaction;informationonly.
LAN:Ethernet[0]interfaceisnow
active.
InfoTheIMMEthernetinterface
hasbeenenabled.
Noaction;informationonly.
DHCPsettingchangedtobyuser
%1.(%1=userID)
Info
Auserhaschangedthe
DHCPmode.
Noaction;informationonly.
IMM:Conguration%1restoredfrom
acongurationlebyuser%2.(%1=
CIM_CongurationData.CongurationName;
%2=userID)
Info
AuserhasrestoredtheIMM
congurationbyimportinga
congurationle.
Noaction;informationonly.
Watchdog%1ScreenCapture
Occurred.(%1=OSWatchdogor
LoaderWatchdog)
ErrorAnoperating-systemerror
hasoccurred,andthescreen
capturewassuccessful.
1.Recongurethewatchdog
timertoahighervalue.
2.MakesurethattheIMM
EthernetoverUSBinterfaceis
enabled.
3.ReinstalltheRNDISor
cdc_etherdevicedriverforthe
operatingsystem.
4.Disablethewatchdog.
5.Checktheintegrityofthe
installedoperatingsystem.
Chapter4.Diagnostics43