User Guide ThinkPad Yoga 14
Note: Before using this information and the product it supports, be sure to read and understand the following: • Safety, Warranty, and Setup Guide • Regulatory Notice • “Important safety information” on page vi • Appendix E “Notices” on page 165 The Safety, Warranty, and Setup Guide and the Regulatory Notice have been uploaded to the Web site. To refer to them, go to http://www.lenovo.com/UserManuals and follow the instructions on the screen. Third Edition (January 2015) © Copyright Lenovo 2014, 2015.
Contents Read this first . . . . . . . . . . . . . . v Important safety information . . . . . . . . Conditions that require immediate action . Service and upgrades . . . . . . . . . Power cords and power adapters . . . . Extension cords and related devices . . . Plugs and outlets . . . . . . . . . . . Power supply statement . . . . . . . . External devices . . . . . . . . . . . General battery notice . . . . . . . . . Notice for built-in rechargeable battery . .
Travel accessories . . . . . . . . . . . 65 Chapter 5. Security . . . . . . . . . . 67 Using passwords. . . . . . . . . . . . . Typing passwords . . . . . . . . . . Power-on password . . . . . . . . . . Supervisor password . . . . . . . . . Hard disk passwords . . . . . . . . . Hard disk security . . . . . . . . . . . . Setting the security chip . . . . . . . . . . Using the fingerprint reader. . . . . . . . . Notice on deleting data from your storage drive. Using firewalls . . . . . . . . . . . . . .
Locating wireless regulatory notices . . . . Certification related information . . . . . . . . Export classification notice . . . . . . . . . . Electronic emission notices. . . . . . . . . . Federal Communications Commission Declaration of Conformity . . . . . . . . Industry Canada Class B emission compliance statement . . . . . . . . . . . . . . . European Union - Compliance to the Electromagnetic Compatibility Directive . . . German Class B compliance statement . . . Korea Class B compliance statement . .
iv User Guide
Read this first Be sure to follow the important tips given here to get the most use and enjoyment out of your computer. Failure to do so might lead to discomfort or injury, or cause your computer to fail. Protect yourself from the heat that your computer generates. When your computer is turned on or the battery is charging, the base, the palm rest, and some other parts may become hot. The temperature they reach depends on the amount of system activity and the level of charge in the battery.
Protect your computer and data when moving it. Before moving a computer equipped with an internal storage drive, do one of the following: • Turn it off. • Put it in sleep mode. • Put it in hibernation mode. This will help to prevent damage to the computer, and possible loss of data. Handle your computer gently. Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy objects on your computer, display, or external devices. Carry your computer carefully.
Conditions that require immediate action Products can become damaged due to misuse or neglect. Some product damage is serious enough that the product should not be used again until it has been inspected and, if necessary, repaired by an authorized servicer. As with any electronic device, pay close attention to the product when it is turned on. On very rare occasions, you might notice an odor or see a puff of smoke or sparks vent from your product. Or you might hear sounds like popping, cracking or hissing.
Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety. CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Before replacing any CRUs, turn off the computer and wait three to five minutes to let the computer cool before opening the cover. Power cords and power adapters DANGER Use only the power cords and power adapters supplied by the product manufacturer.
Extension cords and related devices Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use are rated to handle the electrical requirements of the product. Never overload these devices. If power strips are used, the load should not exceed the power strip input rating. Consult an electrician for more information if you have questions about power loads, power requirements, and input ratings.
External devices CAUTION: Do not connect or disconnect any external device cables other than USB cable while the computer power is on; otherwise, you might damage your computer. To avoid possible damage to attached devices, wait at least five seconds after the computer is shut down to disconnect external devices. General battery notice DANGER Batteries supplied by Lenovo for use with your product have been tested for compatibility and should only be replaced with approved parts.
Notice for non-rechargeable coin-cell battery DANGER If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The battery contains a small amount of harmful substance. Do not heat to more than 100°C (212°F). The following statement applies to users in the state of California, U.S.A. California Perchlorate Information: Products containing manganese dioxide lithium coin-cell batteries may contain perchlorate. Perchlorate Material - special handling may apply, See www.dtsc.ca.
• Do not operate your computer inside furniture, as this might increase the risk of overheating. • Airflow temperatures into the computer should not exceed 35°C (95°F). Electrical current safety information DANGER Electric current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: • Do not use your computer during a lightning storm.
Liquid crystal display (LCD) notice CAUTION: The liquid crystal display (LCD) is made of glass, and rough handling or dropping the computer can cause the LCD to break. If the LCD breaks and the internal fluid gets into your eyes or on your hands, immediately wash the affected areas with water for at least 15 minutes; if any symptoms are present after washing, get medical care. Using headphones or earphones CAUTION: Excessive sound pressure from earphones and headphones can cause hearing loss.
xiv User Guide
Chapter 1. Product overview This chapter provides information about the locations of connectors, locations of important product labels, computer features, specifications, operating environment, and preinstalled programs.
5 System-status indicator 6 Trackpad 7 TrackPoint buttons (available on some models) 8 TrackPoint® pointing stick 9 Windows® Start screen control 10 Multi-touch screen 1 Microphones The microphones capture sound and voice when used with a program capable of handling audio. 2 Camera Use the camera to take pictures or hold a video conference. For more information, see “Using the camera” on page 52. 3 Ambient light sensor (for Windows 8.
Right-side view Note: Depending on the model, your computer might look different from the following illustration. Figure 2. Right-side view 1 Power button 2 Volume-control buttons 3 Screen-rotation-lock button 4 USB 3.0 connectors 5 High-Definition Multimedia Interface (HDMI™) connector 1 Power button Press the power button to turn on the computer or put the computer into sleep mode. For information about how to turn off the computer, see “Frequently asked questions” on page 17.
2 Volume-control buttons The volume-control buttons enable you to adjust the volume while you are using your computer in the tablet mode. 3 Screen-rotation-lock button Use the screen-rotation-lock button to lock the screen-rotation function. 4 USB 3.0 connectors The Universal Serial Bus (USB) 3.0 connectors are used for connecting USB-compatible devices, such as a USB keyboard or a USB mouse. Attention: When you attach a USB cable to this connector, ensure that the USB mark is facing upward.
1 2 ac power connector Lenovo OneLink connector When the ac power adapter is connected to the ac power connector, the ac power adapter provides ac power to the computer and charges the battery. When a supported ThinkPad OneLink Dock option is connected to the Lenovo OneLink connector, the option can not only extend the computer capabilities but also provide ac power to the computer and charge the battery.
Bottom view Note: Depending on the model, your computer might look different from the following illustration. Figure 4. Bottom view 1 Emergency-reset hole 1 2 Speakers Emergency-reset hole If the computer stops responding and you cannot turn it off by pressing the power button, remove the ac power adapter and insert a needle or a straightened paper clip into the emergency-reset hole to reset the computer. 2 Speakers Your computer is equipped with a pair of stereo speakers.
Notes: • To ensure proper airflow, do not place any obstacles in front of the fan louvers. • The fan louvers of your computer might get too hot when the computer is running heavy tasks. When you are using or carrying the computer, take care to avoid direct contact to the fan louvers. Status indicators Your computer has several status indicators that show the status of your computer. Note: Depending on the model, your computer might look different from the illustrations in this topic.
4 Camera-status indicator When the camera-status indicator is on, the camera is in use. 5 6 System-status indicators There are two ThinkPad logos on your computer, one on the palm rest and the other on the outer lid. The illuminated dot in each ThinkPad logo works as a system-status indicator and helps you identify the status of your computer. • Blink for three times: The computer is initially connected to power. • Blink fast: The computer is entering hibernation mode.
For a preinstalled wireless module, this label identifies the actual FCC ID and IC certification number for the wireless module installed by Lenovo. Note: Do not remove or replace a preinstalled wireless module by yourself. For module replacement, you must contact Lenovo service first. Lenovo is not responsible for any damage caused by unauthorized replacement.
computer hardware. If your computer model is licensed to use the Windows 8.1 Pro operating system, that license contains downgrade rights which permit you to use the Windows 7 Professional operating system in place of the Windows 8.1 Pro operating system if you prefer. For more information about the Genuine Microsoft label, go to: http://www.microsoft.com/en-us/howtotell/Hardware.aspx The following figure shows the location of the Genuine Microsoft label.
• Color display with the thin-film transistor (TFT) technology • Brightness control • Camera • Microphones Keyboard • Function keys • Keyboard frame travel function • 6-row backlight keyboard • ThinkPad pointing device Interface • ac power connector • Always On USB 2.0 connector • Audio connector • 4-in-1 media-card slot • HDMI connector • Lenovo OneLink connector • Two USB 3.
Power source (ac power adapter) • Sine-wave input at 50-60 Hz • Input rating of the ac power adapter: 100-240 V ac, 50-60 Hz Operating environment This section provides information about your computer operating environment. Environment: • Maximum altitude without pressurization: 3048 m (10 000 ft) • Temperature – At altitudes up to 2438 m (8000 ft) – Operating: 5.0°C (41°F) to 35.0°C (95°F) – Storage: 5.0°C (41°F) to 43.
Note: If you do not find the program you need, open the Lenovo ThinkVantage® Tools program to find the dimmed icon for the program. Then double-click the icon to install the program. To access Lenovo programs through Windows Search, do the following: 1. Click the Start button and then type the program name or the icon name into the search box. 2. Locate the program by the program name or the icon name and then click the program to launch it.
Note: If you do not find the program you need, go to Lenovo PC Experience ➙ Lenovo Tools. Then you can find the program you need. Depending on the model, your computer might support the following Lenovo programs: Note: The available programs are subject to change without notice.
The Power Manager program provides convenient, flexible, and complete power management for the computer. It enables you to adjust your computer power settings to achieve the best balance between performance and power saving. • Recovery Media (Windows 7) The Recovery Media program enables you to restore the contents of the storage drive to the factory default settings. • Rescue and Recovery (Windows 7) The Rescue and Recovery program is a one-button recovery and restore solution.
• Lenovo Solution Center (Windows 7 and Windows 8.1) The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems. It combines diagnostic tests, system information collection, security status, and support information, along with hints and tips for optimal system performance. • Password Manager (Windows 7 and Windows 8.1) The Password Manager program automatically captures and fills in authentication information for Windows programs and Web sites.
Chapter 2. Using your computer This chapter provides information on using some of the computer components.
• To download the user guide in another language, go to: http://www.lenovo.com/support. Then follow the instructions on the screen. How to turn off my computer? • For Windows 7: Open the Start menu, then click Shut down. • For Windows 8.1: Do one of the following: – Go to the Start screen by pressing the Windows key, click the power icon in the top-right corner of the screen, then click Shut down. – Move your pointer to the top-right or bottom-right corner of the screen to display the charms.
Can I change the Windows 8.1 startup behavior to open either the desktop or the Start screen? • On the Windows 8.1 operating system, you can set the computer to open either the desktop or the Start screen by default. To set the default startup screen, do the following: 1. On the desktop, move your pointer to the taskbar at the bottom of the screen and right-click or tap on the windows notification area. 2. Click or tap Properties. The Taskbar and Navigation properties window is displayed. 3.
Using the special buttons This topic provides instructions on how to use the special buttons. The computer is equipped with special buttons as shown in the following illustration. You can control some functions of your computer through the special buttons, without the use of the keyboard. 1 Power button: Press the power button to turn on the computer. 2 Speaker volume-up button: Press the speaker volume-up button to increase the speaker volume.
Touch gesture (touch models only) Description Touch: Tap. Mouse action: Click. Function: Open an app or perform an action on an open app, such as Copy, Save, and Delete, depending on the app. Supported operating systems: Windows 7 and Windows 8.1 Touch: Tap and hold. Mouse action: Right-click. Function: Open a menu with multiple options. Supported operating systems: Windows 7 and Windows 8.1 Touch: Slide. Mouse action: Scroll the mouse wheel, move the scroll bar, or click the scroll arrow.
Touch gesture (touch models only) Description Touch: Swipe in from the right edge. Mouse action: Move the pointer to the bottom-right or top-right corner of your screen. Function: Display the charms that contain system commands, such as Start, Settings, Search, Share, and Devices. Supported operating system: Windows 8.1 Touch: Swipe in from the left edge. Mouse action: Move the pointer to the top-left corner of your screen, and then click. Keep clicking to cycle through the open apps.
Touch gesture (touch models only) Description Touch: Swipe in from the top or bottom edge of an open app. Mouse action: Right-click anywhere on an open app. Function: View the app commands on an open app, such as Copy, Save, and Delete, depending on the app. Supported operating system: Windows 8.1 Touch: Swipe in from the top edge to the bottom on an open app. Mouse action: From the top edge of the screen, click, hold, and move the pointer to the bottom of the screen. Then, release the button.
• To purchase the ThinkPad Active Pen, go to the Lenovo Support Web site: http://www.lenovo.com/accessories Using the ThinkPad Active Pen The ThinkPad Active Capacitive Pen is battery-powered and used with one AAAA alkaline battery. To install a battery into the ThinkPad Active Pen, unscrew and remove the end cap of the ThinkPad Active Pen, insert the battery into the battery compartment with the negative polarity facing outward, and then tighten the end cap back into position.
1. Insert the pen holder connector into an available USB connector on the computer. 2. Insert the ThinkPad Active Pen into any of the three holes in the pen holder, as shown in the following illustrations: Chapter 2.
Operating modes This section provides information about the operating modes of your computer. Your computer provides the notebook mode, stand mode, tablet mode, and tent mode that enable you to work more conveniently in your working environment.
Attention: Do not rotate the computer display with too much force, otherwise the computer display or hinges might get damaged. Do not apply too much force to the upper-right or upper-left corner of the computer display. Note: Depending on the model, your computer might look different from the following illustration. Display angle for each operating mode The angle between the front of the computer display and the keyboard is different in each operating mode.
In the notebook mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are automatically enabled. By default, the autorotate feature is enabled. To avoid undesired screen rotation, press the screen-rotation-lock button to disable the autorotate feature. For instructions on how to use the button, refer to “Using the tablet buttons” on page 20. After you press the screen-rotation-lock button, the autorotate feature is disabled and the autorotate-off indicator is displayed on your screen.
2. Position your computer as shown. Your computer is now in the stand mode. In the stand mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are automatically disabled. By default, the autorotate feature is enabled. To avoid undesired screen rotation, press the screen-rotation-lock button to disable the autorotate feature. For instructions on how to use the button, refer to “Using the tablet buttons” on page 20.
Attention: Do not rotate the computer display with too much force, otherwise the computer display or hinges might get damaged. Do not apply too much force to the upper-right or upper-left corner of the computer display. If your computer is in the stand mode, do the following to turn the computer from the stand mode into the tablet mode: Note: Depending on the model, your computer might look different from the illustrations in this topic. 1.
In the tablet mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are automatically disabled. However, you can control some functions of your computer through the special buttons and the multi-touch screen, without the use of the keyboard and the touch pad. For more information, refer to “Using the tablet buttons” on page 20 and “Using the multi-touch screen” on page 20.
If your computer is in the tablet mode, do the following to turn the computer from the tablet mode into the tent mode: Note: Depending on the model, your computer might look different from the illustrations in this topic. 1. Slowly rotate your computer display anticlockwise to any angle within a range of 190 degrees to 359 degrees. Note: The degrees refers to the angle degrees between the LCD and the keyboard. 2. Position your computer as shown. Your computer is now in the tent mode.
• In the notebook mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are automatically enabled. In the stand mode, tablet mode, and tent mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are automatically disabled. The following illustration shows the location of the keyboard. Behavior of the keyboard The frame of the keyboard travels upward when you rotate the computer display from 190 degrees to 360 degrees.
Customizing the keyboard You can customize the keyboard to achieve the extended functions of the keyboard. To customize the keyboard, do the following: 1. Go to Control Panel. 2. Click Hardware and Sound ➙ Device Manager ➙ Keyboards ➙ Standard PS/2 keyboard and then follow the instructions on the screen. Special keys The following illustration shows the locations of main special keys for your computer. Notes: • Depending on the model, your computer might look different from the illustrations in this topic.
1 Function keys • + : Press Fn+Esc to disable or enable the Fn Lock function. When the Fn Lock function is disabled: The Fn Lock indicator is off (default mode). To initiate the special function printed as an icon on each key, press the function key directly. To input F1-F12, press the Fn key and the corresponding function key. When the Fn Lock function is enabled: The Fn Lock indicator turns on. To input F1-F12, press the function keys directly.
• • • : Enables or disables the wireless networking features. For more information on the wireless features, refer to “Wireless connections” on page 47. + : Controls the keyboard backlight : For Windows 7: Opens Control Panel. For Windows 8.1: Opens the Settings charm. • : For Windows 7: Opens Windows Search. For Windows 8.1: Opens the Search charm. • • : Views the programs that you have opened. : For Windows 7: Opens Computer. For Windows 8.1: Views all the programs.
• “ThinkPad pointing device without TrackPoint buttons” on page 40 ThinkPad pointing device with TrackPoint buttons This type of ThinkPad pointing device consists of the following components: 1 2 TrackPoint pointing device Trackpad By default, both the TrackPoint pointing device and the trackpad are active with the touch gestures enabled. To change the settings, see “Customizing the ThinkPad pointing device” on page 43.
The TrackPoint pointing device consists of a TrackPoint pointing stick and a set of TrackPoint buttons: 1 TrackPoint pointing stick Left-click button (primary-click button) Right-click button (secondary-click button) 4 Scroll bar 2 3 To use the TrackPoint pointing device, refer to the following instructions: Note: Place your hands in the typing position and use your index finger or middle finger to apply pressure to the pointing-stick nonslip cap.
The trackpad can be divided into two zones: 1 2 Left-click zone (primary-click zone) Right-click zone (secondary-click zone) To use the trackpad, refer to the following instructions: • Point Slide one finger across the surface of the trackpad to move the pointer accordingly. • Left-click Press the left-click zone 1 to select or open an item. You also can tap anywhere on the surface of the trackpad with one finger to perform the left-click action.
ThinkPad pointing device without TrackPoint buttons This type of ThinkPad pointing device consists of the following components: 1 2 Pointing stick Trackpad Depending on your preference, you can use the pointing device in one of the following modes: • TrackPoint mode • Trackpad mode • Classic TrackPoint mode To change a mode for the pointing device, see “Customizing the ThinkPad pointing device” on page 43. Note: By default, the TrackPoint mode and the Trackpad mode are both enabled.
1 Point Use the pointing stick to move the pointer on the screen. To use the pointing stick, apply pressure to the pointing stick nonslip cap in any direction parallel to the keyboard. The pointer moves accordingly but the pointing stick itself does not move. The speed at which the pointer moves depends on the amount of pressure you apply to the pointing stick. 2 Scroll Press and hold the dotted scrolling bar while applying pressure to the pointing stick in the vertical or horizontal direction.
1 Point Use the pointing stick to move the pointer. To use the pointing stick, apply pressure to the nonslip cap on the pointing stick in any direction parallel to the keyboard. The pointer moves accordingly but the pointing stick itself does not move. The speed at which the pointer moves depends on the amount of pressure you apply to the pointing stick. 2 Scroll Press and hold the dotted scrolling bar while applying pressure to the pointing stick in the vertical or horizontal direction.
Three-finger swipe Put three fingers on the trackpad and move them left to show the next item. Move them right to show the previous item. Four-finger swipe Put four fingers on the trackpad and move them upward to view and choose from opened apps. Four-finger swipe Put four fingers on the trackpad and move them downward to show the desktop. Note: The following touch gestures are available only on the Windows 8.1 operating system.
Power management When you use your computer away from electrical outlets, you depend on battery power to keep your computer running. Different computer components consume power at different rates. The more you use the power-intensive components, the faster you consume battery power. Spend more time unplugged with ThinkPad batteries. Mobility has revolutionized business by enabling you to take your work wherever you go.
3. For Low battery alarm or Critically low battery alarm, set the percentage of the power level and set the action. Note: If your computer enters sleep or hibernation mode when the battery is low, but the alarm message has not yet been displayed, the message will be displayed when the computer resumes. To resume normal operation, when the message is displayed, click OK. Using the ac power The power to run your computer can come either from the battery or from ac power.
Note: To maximize the life of the battery, the computer does not start recharging the battery if the remaining power is greater than 95%. Maximizing the battery life To maximize the life of the battery, do the following: • Use the battery until the charge is completely depleted. • Recharge the battery completely before using it. You can see whether the battery is fully charged from the battery-status icon in the Windows notification area.
programs that are running. When the computer enters hibernation mode, all open programs, folders, and files are saved to the storage drive, and then the computer turns off. If you put your computer into hibernation mode with the wake-up function disabled, the computer does not consume any power. The wake-up function is disabled by default. If you put your computer into hibernation mode with the wake-up function enabled, the computer consumes a small amount of power.
• If there are restrictions on the use of computer wireless features on an airplane, you need to disable the wireless features of your computer before boarding. Depending on the wireless devices installed on your computer, you might be able to use the following wireless networks: • Wireless LAN connection • Bluetooth connection Using the wireless LAN connection A wireless local area network (LAN) covers a relatively small geographic area, such as an office building or a house. Devices based on the 802.
Checking the wireless-LAN connection status You can check the wireless-LAN connection status through the wireless-network-connection-status icon in the Windows notification area. The more bars encompassed, the better the signal is. For the Windows 7 operating system, you also can check the Access Connections gauge, the Access Connections status icon, or the Access Connections wireless status icon in the Windows notification area.
3. Select Send To ➙ Bluetooth Devices. 4. Select a Bluetooth device, and then follow the instructions on the screen. • For Windows 8.1: 1. Go to the desktop, and then right-click the data that you want to send. 2. Select Send To ➙ Bluetooth Devices. 3. Select a Bluetooth device, and then follow the instructions on the screen. For more information, refer to the Windows help information system and the Bluetooth help information system.
Choosing a display mode You can display your desktop and apps on the computer display, the external display, or both. To choose how to display the video output, press the display-mode switching key mode you prefer. and then select a display There are four display modes: • Disconnect: Displays the video output only on your computer screen. Note: Depending on the situation, you might see Disconnect, PC screen only, Computer only, or Disconnect projector.
Note: The combo audio connector does not support a conventional microphone. The following table shows which functions of the audio devices attached to the connectors on your computer or the supported ThinkPad OneLink Dock are supported. Table 3. Audio feature list Connector Headset with a 3.5 mm (0.
• Secure Digital (SD) card • Secure Digital High-Capacity (SDHC) card Note: Your computer does not support the CPRM feature for the SD card. Attention: While transferring data to or from a flash media card, such as an SD card, do not put your computer into sleep or hibernation mode before the data transfer completes; otherwise, your data could become damaged. Installing a flash media card Attention: • Before you start installing a card, touch a metal table or a grounded metal object.
54 User Guide
Chapter 3. Enhancing your computer This chapter provides instructions on how to use hardware devices to expand your computer capabilities. • “Finding ThinkPad options” on page 55 • “ThinkPad OneLink Dock” on page 55 • “ThinkPad OneLink Pro Dock” on page 56 Finding ThinkPad options If you want to expand the capabilities of your computer, Lenovo has a number of hardware accessories and upgrades to meet your needs.
2 USB 3.0 connector: Used to connect devices that are compatible with USB 3.0 and USB 2.0. 3 Always On USB connector: By default, the Always On USB connector enables you to charge some mobile digital devices and smartphones no matter when your computer is in sleep mode, hibernation mode, or is off. For more information, refer to the documentation that comes with the dock. 4 Combo audio connector: Used to connect headphones or a headset that has a 3.5-mm (0.14-inch), 4-pole plug.
Front view 1 Security-lock slot: To protect your dock from theft, you can purchase a security cable lock, such as a Kensington-style cable lock, that fits this security-lock slot to lock your dock to a desk, table, or other non-permanent fixture. 2 USB 3.0 connector: Used to connect devices that are compatible with USB 3.0 and USB 2.0.
1 USB 2.0 connectors: Used to connect devices that are compatible with USB 2.0. 2 USB 3.0 connectors: Used to connect devices that are compatible with USB 3.0 and USB 2.0. 3 Ethernet connector: Used to connect the dock to an Ethernet LAN. 4 DisplayPort® connector: Used to attach a high-performance monitor, a direct-drive monitor, or other devices that use a DisplayPort connector. 5 Power connector: Used to connect the ac power adapter.
Chapter 4. You and your computer This chapter provides information about accessibility, comfort, and traveling with your computer. • “Accessibility and comfort” on page 59 • “Traveling with your computer” on page 64 Accessibility and comfort Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform.
Display: Position the display to maintain a comfortable viewing distance of 510-760 mm (20-30 inches). Avoid glare or reflections on the display from overhead lighting or outside sources of light. Keep the display screen clean and set the brightness to levels that enable you to see the screen clearly. Press the brightness-down key or the brightness-up key to adjust display brightness. Head position: Keep your head and neck in a comfortable and neutral (vertical, or upright) position.
Users also can use the Ease of Access Center provided in the Windows operating system to configure their computers to suit their physical and cognitive needs. The Ease of Access Center is a central location that you can use to configure the accessibility settings and programs available in the Microsoft Windows operating system. To use the Ease of Access Center, open Control Panel and click Ease of Access ➙ Ease of Access Center.
Speech Recognition Speech Recognition enables you to control your computer by voice. Using only your voice, you can start programs, open menus, click buttons and other objects on the screen, dictate text into documents, and write and send e-mails. Everything you do with the keyboard and mouse can be done with only your voice. To open Speech Recognition, do the following: • For Windows 7: Click the Start button. Then, type Speech Recognition into the search field.
– Zoom in: Move two fingers farther apart on the touch screen to enlarge the size of text, pictures, maps, or other objects. – Zoom out: Move two fingers closer together on the touch screen to reduce the size of text, pictures, maps, or other objects. Screen resolution You can make your documents easier to read by adjusting the screen resolution of your computer. To adjust the screen resolution, right click anywhere on the desktop, click Screen resolution, and then adjust the settings as you prefer.
For more information about how to use and configure On-Screen Keyboard, see the Windows Help and Support information system. Personalized keyboard The tactile bumps on the keyboard provide a reference point from which you can easily locate all keys on the keyboard without visual assistance. To adjust your keyboard settings, open Control Panel, click Ease of Access ➙ Ease of Access Center, and then click Make the keyboard easier to use.
• If you carry an ac power adapter, detach the ac cord from it to avoid damaging the cord. Travel tips on airplanes If you carry your computer into an airplane, take note of the following tips: • If you intend to use your computer or wireless services (such as Internet and Bluetooth), check with the airline for restrictions and availability of services before boarding the airplane. If there are restrictions on the use of computers with wireless features on the airplane, you must abide by those restrictions.
66 User Guide
Chapter 5. Security This chapter provides information about how to protect your computer from theft and unauthorized use.
4. Depending on your need, do one of the following: • To set a password, do the following: a. In the Enter New Password field, type a desired password and press Enter. b. In the Confirm New Password field, retype the password and press Enter. • To change a password, do the following: a. In the Enter Current Password field, type the current power-on password and press Enter. b.
– Internal Network Option ROM – Security mode Notes: • The system administrator can set the same supervisor password on many ThinkPad notebook computers to make administration easier. • When Lock UEFI BIOS Settings option is enabled, all BIOS settings cannot be changed. To change the settings, a supervisor password is required. Setting, changing, or removing a supervisor password Before you start, print these instructions. Only a system administrator can set, change, or remove a supervisor password.
The master hard disk password also requires a user hard disk password. The master hard disk password is usually set and used by a system administrator. It enables the administrator to access any hard disk drive or hybrid drive in a system like a master key. The administrator sets the master password; then assigns a user password for each computer in the network. The user can then change the user password as desired, but the administrator still can get access by using the master password.
Note: The hard disk password cannot be removed in User HDP mode. – If you select Master HDP mode, follow the following steps to change the master hard disk password: 1. Type the current master hard disk password in the Enter Current Password field and press Enter. 2. Type the new master hard disk password in the Enter New Password field and press Enter; then retype the new password you just entered in the Confirm New Password field and press Enter. 3. A Setup Notice window is displayed.
Professional and Enterprise editions of the Windows 8.1 operating system. Refer to “Using Windows BitLocker Drive Encryption” on page 72. • Before you dispose of, sell, or hand over your computer, be sure to delete data stored on it. For more information, refer to “Notice on deleting data from your storage drive” on page 75. Note: The hard disk drive or hybrid drive built into your computer can be protected by UEFI BIOS.
To set an item on the Security Chip submenu, do the following: 1. Turn off your computer. Wait for about five seconds, and then turn on the computer again. 2. When the logo screen is displayed, press F1 to start the ThinkPad Setup program. 3. Select Security ➙ Security Chip by using the directional keys. 4. Press Enter. The Security Chip submenu opens. 5. Move to an item you want to set by using the directional keys. When the item is highlighted, press Enter. 6. Set other items that you want to set. 7.
2. Follow the on-screen instructions to complete several scans until the enrollment is completed. Maintaining the fingerprint reader The following actions could damage the fingerprint reader or cause it not to work properly: • Scratching the surface of the reader with a hard, pointed object. • Scraping the surface of the reader with your fingernail or anything hard. • Using or touching the reader with a dirty finger.
Notice on deleting data from your storage drive Some of the data stored on storage drive might be sensitive. Handing your computer over to someone else without deleting the installed software, such as operating systems and application software, might even violate license agreements. Be sure to delete data stored on the storage drive before you dispose of, sell, or hand over your computer.
For more information about how to use your antivirus software, refer to the help information system of your antivirus software.
Chapter 6. Advanced configuration While it is important to protect files, data, and settings that are on the storage drive, you also might need to install a new operating system, install new device drivers, update your system UEFI BIOS, or recover preinstalled software. This information will help you handle your computer with proper care and keep it in top working shape.
8. Install the Windows 7 fix modules. You can find the Windows 7 fix modules in the C:\SWTOOLS\OSFIXES\ directory. For more information, go to the Microsoft Knowledge Base home page at: http://support.microsoft.com/ 9. Install the registry patches, for example the Enabling Wake on LAN from Standby for ENERGY STAR patch. To download and install the registry patches, go to the Lenovo Support Web site at: http://www.lenovo.
8. Install the device drivers. See “Installing device drivers” on page 79. Note: After installing the operating system, do not change the initial UEFI/Legacy Boot setting in the ThinkPad Setup program. Otherwise, the operating system will not start correctly. When you install the Windows 8.
Note: Some menu items are displayed only if the computer supports the corresponding features. 3. Set the value of an item by doing one of the following: • Press the F6 key to change to a higher value. • Press the F5 key to change to a lower value. Note: Default values are in boldface. 4. To change other configurations, press the Esc key to exit the submenu and return to the parent menu. 5. When you complete the configuration, press the F10 key to save and exit.
Table 4. Config menu items Menu item Submenu item Selection Comments USB USB UEFI BIOS Support • Disabled Enable or disable boot support from USB storage devices. • Enabled Always On USB • Disabled • Enabled Enable or disable the function of charging external devices in low-power states (standby, hibernation or shutdown). If the system runs in battery mode, this function will work only in standby state. If you select Enabled, your computer can charge external devices in low-power states.
Table 4. Config menu items (continued) Menu item Submenu item Selection Comments controller, and the USB 3.0 connectors will work as USB 2.0 connectors. Keyboard/Mouse Fn and Ctrl Key swap • Disabled • Enabled If you select Enabled, the Fn key will work as the Ctrl key, and the Ctrl key will work as the Fn key. Note: Even when Enabled is selected, you need to press the Fn key to resume the computer from sleep mode to normal operation.
Table 4. Config menu items (continued) Menu item Submenu item Selection Comments CPU Power Management • Enabled Enable or disable the power-saving feature that stops the microprocessor clock automatically when there are no computer activities. Normally, it is not necessary to change the setting. • Disabled Power On with AC Attach • Enabled • Disabled Disable Built-in Battery If enabled, the system is powered on when AC is attached. When the system is in hibernate state, the system resumes.
Table 5. Security menu items Menu item Submenu item Selection Comments Password Supervisor Password • Disabled Refer to “Supervisor password” on page 68. • Enabled Lock UEFI BIOS Settings • Disabled • Enabled Password at Unattended Boot • Disabled Password at Restart • Disabled • Enabled • Enabled Password at Boot Device List • Disabled • Enabled Enable or disable the function that protects items in the ThinkPad Setup program from being changed by unauthorized users.
Table 5. Security menu items (continued) Menu item Submenu item Selection Comments Power-On Password • Disabled Refer to “Power-on password” on page 67. • Enabled Hard Disk1 Password • Disabled • Enabled Hard Disk2 Password • Disabled • Enabled Refer to “Hard disk passwords” on page 69. Refer to “Hard disk passwords” on page 69. Note: This item is available when your computer is equipped with an M.2 solid-state drive.
Table 5. Security menu items (continued) Menu item Submenu item Selection Comments displayed when provisioning the security chip. If you select Disabled, no user confirmation screen will be displayed when provisioning the security chip. Physical Presence for Clear • Disabled • Enabled This option enables or disables confirmation of a user physical presence when clearing the security chip. If you select Enabled, a user confirmation screen will be displayed when clearing the security chip.
Table 5. Security menu items (continued) Menu item Submenu item Selection Comments Virtualization Intel(R) Virtualization Technology • Disabled If you select Enabled, a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel Virtualization Technology. Intel(R) VT-d Feature • Disabled • Enabled • Enabled Intel VT-d stands for Intel Virtualization Technology for directed I/O.
Table 5. Security menu items (continued) Menu item Submenu item Selection Comments Secure Boot Secure Boot • Disabled Enable or disable the Secure Boot feature. • Enabled If you enable the Secure Boot, the following item settings on the Startup menu also will change automatically: 1. The UEFI/Legacy Boot setting will change to UEFI Only. 2. The CSM Support setting will change to No. Select Enable to prevent unauthorized operating systems from running at boot time.
Startup menu To change the startup settings of your computer, select the Startup tab from the ThinkPad Setup menu. Attention: • After you change the startup sequence, ensure that you select a correct device during a copy, a save, or a format operation. Otherwise your data might be erased or overwritten. • If you are using the BitLocker drive encryption, do not change the startup sequence. BitLocker drive encryption locks the computer from starting once detects the change of startup sequence.
Table 6. Startup menu items (continued) Menu item Selection Comments Boot Mode • Quick Quick: The diagnostic splash screen will not be displayed unless you press Esc during starting the system. • Diagnostics Diagnostics: The diagnostic splash screen is always displayed during starting the system. Option Key Display • Enabled • Disabled Boot Device List F12 Option • Enabled • Disabled Choose whether to show the option key message when the system is started.
The following submenu items are displayed: • Exit Saving Changes: Save the changes and restart the computer. • Exit Discarding Changes: Discard the changes and restart the computer. Note: The changes of the following submenu items will not be discarded and can be reset in ThinkPad Setup menu: – Date & Time – Supervisor password – Power-on password – Hard disk password • Load Setup Defaults: Restore to the factory default settings. Note: Enable OS Optimized Defaults to meet the Windows 8.
Once the computer is configured and operational, you can manage it by using the software and the manageability features that are already integrated into the client computer and the network. Desktop Management Interface The UEFI BIOS of your computer supports an interface called System Management BIOS (SMBIOS) Reference Specification, version 2.7.1. SMBIOS provides information about the hardware components of your computer.
Chapter 7. Preventing problems An important part of owning a ThinkPad notebook computer is maintenance. With proper care, you can avoid common problems. The chapter provides information that can help you keep your computer running smoothly.
– Access ThinkPad Setup and load the default settings. – Restart the computer and start the recovery operation. – If your computer uses discs as the recovery media, do not remove the disc from the drive until prompted to do so. • For suspected hard disk drive or hybrid drive issues, refer to “Diagnosing problems” on page 99 and run a diagnostic test for the drive before you call the Customer Support Center.
scheduled updates to search by severity (critical updates, critical and recommended updates, or all updates) so the list you choose from contains only those update types that are of interest to you. For more information about how to use the System Update program, refer to the help information system of the program. Taking care of your computer Although your computer is designed to function reliably in normal work environments, you need to use common sense in handling it.
• Store your external and removable hard disk drives or optical drives in appropriate containers or packaging when they are not being used. • Before you install a memory card such as an SD card, SDHC card, SDXC card, and a MultiMediaCard, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. Static electricity could damage the device.
Cleaning your computer display To clean the computer display, do the following: 1. Gently wipe the display with a dry, soft lint-free cloth. If you see a scratchlike mark on your display, it might be a stain transferred from the keyboard or the TrackPoint pointing stick when the cover was pressed from the outside. 2. Wipe or dust the stain gently with a soft, dry cloth. 3.
98 User Guide
Chapter 8. Troubleshooting computer problems This chapter provides information on what to do if you experience a problem with your computer. This chapter contains the following topics: • “Diagnosing problems” on page 99 • “Troubleshooting” on page 99 Diagnosing problems If you experience problems with your computer, use the Lenovo Solution Center program as a starting point for solving them. The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems.
Note: If you cannot turn off your computer, or if you cannot restart it, continue with step 2. 2. Remove the ac power adapter from the computer, and reset the system by inserting a straightened paper clip into the emergency-reset hole. To locate the reset hole, refer to “Bottom view” on page 6. Reattach the ac power adapter. Notes: a. If the computer does not turn on, continue with step 3. b.
• Message: 0189: Invalid RFID configuration information area. Solution: The EEPROM checksum is not correct (block # 4 and 5). Reset the block # 0 and 1, for example the box Serial Number, and/or block # 4 and 5, for example the UUID. • Message: 0190: Critical low-battery error. Solution: The computer turns off, because the battery is low. Connect the ac power adapter to the computer and charge the battery. • Message: 0191: System Security - Invalid remote change requested.
Solution: Machine UUID is invalid. Have the computer serviced. • Message: Fan error Solution: Cooling fan has failed. Have the computer serviced. • Message: Thermal sensing error Solution: The thermal sensor is not functioning correctly. Shut down the computer immediately and have the computer serviced. Beep errors Table 7. Beep errors Problem Solution One short beep, pause, three short beeps, pause, three more short beeps, and one short beep The memory module has a problem. Have the computer serviced.
The network cable must be securely connected to the RJ45 connector of the supported dock. The maximum allowable distance from the computer to the hub is 100 meters (328 feet). If the cable is connected and the distance is within the limit but the problem persists, try a different cable. – You are using the correct device driver. To install the correct driver, do the following: 1. Open Control Panel and click Hardware and Sound ➙ Device Manager.
Note: If you are using the Windows 7 operating system, click Show hidden icons on the windows notification area. The Access Connections icon is displayed. For more information about the icon, refer to the Access Connections help information system. For the Windows 7 operating system, check the Network Name (SSID) and your encryption information. Use the Access Connections program to verify this case-sensitive information.
3. Turn on the computer and try using the keyboard again. If the keyboard problem is resolved, carefully reconnect the external numeric keypad and the external keyboard. Ensure that you have seated the connectors correctly. If the problem persists, ensure that the correct device driver is installed by doing the following: 1. Open Control Panel. Change the view of Control Panel from Category to Large icons or Small icons. 2. Click Keyboard. 3. Select the Hardware tab.
device is working correctly. If the device is not working correctly, click the Troubleshoot button and follow the instructions on the screen. Note: The device driver name depends on the video chip that has been installed on your computer. 5. Click the Color Management tab, and then click the Color Management button. In the displayed Color Management window, click the Advanced tab and ensure that the settings in the Windows Color System Defaults area are set as desired.
Solution: If you have modified a partition on your hard disk drive or hybrid drive by using partition software, information about that partition, or the master boot record might have been destroyed. 1. Turn off the computer, and then turn it on again. 2. If you still see only the pointer on the screen, do the following: – If you have used the partition software, examine the partition on the hard disk drive or hybrid drive by using the software, and recover the partition if required.
• Problem: Wrong characters are displayed on the screen. Solution: Did you follow the correct procedure when installing the operating system or application program? If you did, have the external monitor serviced. • Problem: The Extend desktop function does not work. Solution: Enable the Extend desktop function by doing the following: 1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical outlet. 2. Turn on the external monitor and the computer. 3.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 4. Double-click Sound, video and game controllers. 5. Make sure that the Conexant HD Audio driver is enabled and configured correctly. • Problem: Recordings made using the microphone input are not loud enough. Solution: Ensure that the Microphone Boost function is turned on and set by doing the following: 1. Open Control Panel. 2. Click Hardware and Sound. 3. Click Sound. 4.
3. Look at the tabs of playback devices. If you have attached a headphone, the headphone will be automatically set as the default device, and the headphone tab icon will be checked. 4. To set a different device as the default, click the speaker tab. Click the Set Default Device drop down list box. Select Set Default Device. That speaker tab icon will now have a check mark. 5. Play any sound by use of a music program such as Windows Media Player. Ensure that sound comes from the speakers.
3. Reconnect the ac power adapter, then turn on the computer. 4. If the power adapter icon still is not displayed on the windows notification area and the system-status indicator does not blink, have the ac power adapter and your computer serviced. Note: To display the power adapter (power plug) icon, click Show hidden icons on the windows notification area. Power problems Print these instructions now and keep the instructions with your computer for reference later.
• Problem: The computer enters sleep mode (the sleep indicator turns on) immediately after the power-on self-test. Solution: Ensure that: – The battery is charged. – The operating temperature is within the acceptable range. Refer to “Operating environment” on page 12. If the battery is charged and the temperature is within range, have the computer serviced. • Problem: A critical low-battery error occurs, and the computer immediately turns off. Solution: The battery power is getting low.
hard disk drive or hybrid drive problems • Problem: The hard disk drive or hybrid drive makes a rattling noise intermittently. Solution: The rattling noise might be heard: – When the hard disk drive or hybrid drive begins or finishes getting access to data. – When you carry the hard disk drive or hybrid drive. – When you carry your computer. This is a normal characteristic of a hard disk drive or hybrid drive and is not a defect. • Problem: The hard disk drive or hybrid drive does not work.
A USB problem Problem: A device connected to the USB connector does not work. Solution: Open the Device Manager window. Ensure that the USB device setup is correct, and that the assignment of computer resource and the installation of the device driver are correct. To open the Device Manager window, go to Control Panel and click Hardware and Sound ➙ Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Chapter 9. Recovery overview This chapter provides information about the recovery solutions provided by Lenovo. • “Recovery overview for the Windows 7 operating system” on page 115 • “Recovery overview for the Windows 8.1 operating system” on page 120 Recovery overview for the Windows 7 operating system This section provides information about the recovery solutions provided by Lenovo on the Windows 7 operating system.
To create recovery media, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Factory Recovery Disks. Then, follow the instructions on the screen. Using recovery media This section provides instructions on how to use recovery media on different operating systems. • You can use recovery media to restore the computer to the factory default settings only. You can use recovery media to put the computer in an operational state after all other methods of recovery have failed.
Performing a recovery operation This section provides instructions on how to perform a recovery operation using the Rescue and Recovery program. 1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Enhanced Backup and Restore. The Rescue and Recovery program opens. 2. In the Rescue and Recovery program main window, click the Launch advanced Rescue and Recovery arrow. 3. Click the Restore your system from a backup icon. 4.
Note: If the Rescue and Recovery workspace fails to open, see “Solving recovery problems” on page 120. 4. Do one of the following: • To rescue files from your hard disk drive, your hybrid drive or a backup, click Rescue files and follow the instructions on the screen. • To restore your hard disk drive or hybrid drive from a Rescue and Recovery backup or to restore your hard disk drive or hybrid drive to the factory default settings, click Restore your system and follow the instructions on the screen.
• If you have created a rescue medium using a USB optical drive or a USB hard disk drive, use the following instructions to use the rescue medium: 1. Turn on your computer. When the ThinkPad logo is displayed, press F1. The ThinkPad Setup program starts. 2. Choose the Config menu and change the USB 3.0 Mode to be Disabled from the USB submenu. 3. Turn off your computer. 4. Attach the USB optical drive or hard disk drive to one of the USB connectors on your computer. 5.
• In the subfolder for the device, look for the executable file (a file with the extension .exe). Double-click the file, and follow the instructions on the screen. Attention: If you need updated device drivers, do not download them from the Windows Update Web site. Obtain them from Lenovo. For more information, see “Making sure device drivers are current” on page 94.
Resetting your computer to the factory default settings If you want to recycle your computer or just start over, you can reset your computer to the factory default settings. Resetting the computer will reinstall the operating system, reinstall all the programs that came with your computer, and reset all the settings to the factory default settings. Attention: If you reset the computer to the factory default settings, all your personal files and settings will be deleted.
Creating recovery media To create recovery media, you need a USB drive with at least 8 GB of storage. The required USB capacity depends on the size of the recovery image. Attention: Creating recovery media will delete anything stored on the USB drive. To avoid data loss, make a backup copy of all the data that you want to keep. To create recovery media, do the following: Note: Ensure that your computer is connected to ac power. 1.
Chapter 10. Replacing devices This chapter provides instructions on how to install or replace hardware for your computer.
5. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off automatically. Wait three to five minutes to let the computer cool. Replacing the keyboard Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. Removing the keyboard To remove the keyboard, do the following: Note: Your computer might look different from the illustrations in this topic. 1. Disable the built-in battery.
6. Pivot the keyboard slightly upward as shown by the arrow 1 . Then turn over the keyboard as shown by the arrow 2 . 7. Detach the connectors and remove the keyboard. Installing the new keyboard To install the new keyboard, do the following: Chapter 10.
1. Attach the connectors and then turn over the keyboard. 2. Insert the keyboard as shown by the arrows. Ensure that the rear edge of the keyboard (the edge that is close to the computer display) is under the frame of the keyboard bezel.
3. Slide the keyboard in the direction shown by the arrows until the latches of the keyboard are hidden under the keyboard bezel 4. Turn the computer over and reinstall the screws. 5. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the base cover assembly Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. To replace the base cover assembly, do the following: 1.
3. Remove the screw caps 1 and the screws 2 . 4. Loosen the rest of the screws that secure the base cover assembly.
5. Pry up the latches and then remove the base cover assembly. 6. Install the new base cover assembly in place. Chapter 10.
7. Tighten the screws to secure the base cover assembly. 8. Resinstall the rest of the screws 1 and the screw caps 2 . 9. Turn the computer over again. Connect the ac power adapter and all cables. Replacing the memory module Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. Increasing memory capacity is an effective way to make programs run faster.
Replacing the memory module To replace the memory module, do the following: 1. Disable the built-in battery. See “Disabling the built-in battery” on page 123. 2. Close the computer display, and turn the computer over. 3. Remove the base cover assembly. See “Replacing the base cover assembly” on page 127. 4. Open the latches on both sides of the memory slot at the same time 1 , and then remove the memory module 2 . 5.
• Replace the storage drive only if you upgrade it or have it repaired. The connectors and slot of the storage drive are not designed for frequent changes, or drive swapping. • Do not drop the drive or subject it to physical shocks. Put the drive on a material, such as soft cloth, that absorbs any physical shocks. • Do not apply pressure to the cover of the drive. • Do not touch the connector.
6. Disconnect the drive cable from the storage drive. 7. Reconnect the drive cable to the new storage drive. 8. Place the new drive into the drive bay. Chapter 10.
9. Attach the connector. 10. Reinstall the base cover assembly. 11. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the button I/O card Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. To replace the button I/O card, do the following: Attention: Sensitive components are mounted on the button I/O card. Avoid any kind of rough handling during the replacement. 1.
5. Remove the button I/O card vertically. 6. Insert the new button I/O card. 7. Attach the connector. 8. Reinstall the base cover assembly. 9. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Chapter 10.
Replacing the audio/OneLink/ac power/USB card Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. Note: Depending on the model, your computer might look slightly different from the illustrations in this topic. To replace the audio/OneLink/ac power/USB card, do the following: Attention: Sensitive components are mounted on the card. Avoid any kind of rough handling during the replacement. 1. Disable the built-in battery.
6. Remove the dc-in bracket. 7. Remove the audio/OneLink/ac power/USB card. Chapter 10.
8. Install the new card in place. 9. Install the dc-in bracket in place.
10. Reinstall the screws to secure the audio/OneLink/ac power/USB card. 11. Reconnect all the cables. 12. Reinstall the base cover assembly. 13. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the speaker assembly Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. To replace the speaker assembly, do the following: 1. Disable the built-in battery.
4. Detach the connector. 5. Remove the screws. Then remove the speaker assembly.
6. Install the new speaker assembly in place. Then install the screws to secure the speaker assembly. 7. Reattach the connector. 8. Reinstall the base cover assembly. 9. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the coin-cell battery Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. Chapter 10.
DANGER If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The coin-cell battery contains a small amount of harmful substances. To avoid possible injury: • Replace only with a battery of the type recommended by Lenovo. • Keep the battery away from fire. • Do not expose it to excessive heat. • Do not expose it to water or rain. • Do not short-circuit it. • Do not drop, crush, puncture the battery, or make it subject to strong forces.
7. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Chapter 10.
144 User Guide
Chapter 11. Getting support This chapter provides information about getting help and support from Lenovo. • “Before you contact Lenovo” on page 145 • “Getting help and service” on page 145 • “Purchasing additional services” on page 147 Before you contact Lenovo Often, you can solve your computer problems by referring to the information in the explanations of error codes, running diagnostic programs, or by consulting the Lenovo Web site. Registering your computer Register your computer with Lenovo.
Information about your computer and preinstalled software, if any, is available in the documentation that comes with your computer. That documentation includes printed books, online books, readme files, and help files. In addition, information about Lenovo products is available on the World Wide Web. Microsoft Service Packs are the latest software source for Windows product updates. They are available through Web download (connection charges might apply) or through disc.
The following items are not covered: • Replacement or use of parts not manufactured for or by Lenovo or non-warranted parts • • • • • Note: All warranted parts contain a 7-character identification in the format FRU XXXXXXX or a 10-character identification in the format FRU XXXXXXXXXX.
148 User Guide
Appendix A. Regulatory information Wireless related information Wireless interoperability The wireless LAN card is designed to be interoperable with any wireless LAN product that is based on DSSS, CCK, and/or OFDM radio technology, and is compliant to: • The 802.11b/g Standard, 802.11a/b/g or 802.11n, 802.11ac on Wireless LANs, as defined and approved by the Institute of Electrical and Electronics Engineers. • The WiFi certification as defined by the Wi-Fi Alliance.
• Find Me Profile • Immediate Alert Profile • Battery Status Profile Usage environment and your health Integrated wireless cards emit radio frequency electromagnetic energy like other radio devices. However, the level of energy emitted is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.
Locating wireless regulatory notices For more information about the wireless regulatory notices, refer to the Regulatory Notice shipped with your computer. If your computer is shipped without the Regulatory Notice, you can find it on the Web site at: http://www.lenovo.com/UserManuals Certification related information The following table contains information of the product name, compliance ID, and machine types.
Responsible Party: Lenovo (United States) Incorporated 1009 Think Place - Building One Morrisville, NC 27560 Phone Number: 919-294-5900 Industry Canada Class B emission compliance statement CAN ICES-3(B)/NMB-3(B) European Union - Compliance to the Electromagnetic Compatibility Directive This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility.
Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit von Betriebsmitteln, EMVG vom 20. Juli 2007 (früher Gesetz über die elektromagnetische Verträglichkeit von Geräten), bzw. der EMV EG Richtlinie 2004/108/EC (früher 89/336/EWG), für Geräte der Klasse B. Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - CE - zu führen.
154 User Guide
Appendix B. WEEE and recycling statements Lenovo encourages owners of information technology equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. Information on product recycling offerings can be found on Lenovo's Internet site at http://www.lenovo.com/social_responsibility/us/en/.
Disposing of Lenovo computer components Some Lenovo computer products sold in Japan may have components that contain heavy metals or other environmental sensitive substances. To properly dispose of disused components, such as a printed circuit board or drive, use the methods described above for collecting and recycling a disused computer or monitor.
Notice: This mark applies only to countries within the European Union (EU). Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union.
158 User Guide
Appendix C. Restriction of Hazardous Substances Directive (RoHS) European Union RoHS Lenovo products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”). For more information about Lenovo progress on RoHS, go to: http://www.lenovo.com/social_responsibility/us/en/RoHS_Communication.
China RoHS Turkish RoHS The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (EEE).
Ukraine RoHS India RoHS RoHS compliant as per E-Waste (Management & Handling) Rules, 2011. Appendix C.
162 User Guide
Appendix D. ENERGY STAR model information ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment through energy efficient products and practices. Lenovo is proud to offer our customers products with the ENERGY STAR qualified designation.
3. In the Device Manager window, expand Network adapters. 4. Right-click your network adapter device, and click Properties. 5. Click the Power Management tab. 6. Clear the Allow this device to wake the computer check box. 7. Click OK.
Appendix E. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo Access Connections Active Protection System Rescue and Recovery Secure Data Disposal ThinkPad ThinkPad logo ThinkVantage TrackPoint UltraConnect Yoga Intel, Intel SpeedStep, and Intel vPro are trademarks of Intel Corporation in the U. S. and/or other countries. BitLocker, Microsoft, and Windows are trademarks of the Microsoft group of companies.
