User Manual

Chapter 2. 2-14
Selecting a supported display mode
The display mode that monitor uses is controlled by the computer. Therefore, refer to your computer
documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes. This is normal and the
image can be readjusted using automatic image setup and the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel
technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently configured
to a display mode outside the range of this monitor, you may need to re-attach the CRT monitor
temporarily until you have re-configured the system; preferably to 1920x1080 at 60Hz, which
is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-2. Factory set display modes
Addressability Refresh rate
640x350 70 Hz
640x480 60Hz, 66Hz, 72Hz, 75Hz
720x400 70 Hz
800x600 60Hz, 72Hz, 75Hz
1024x768 60Hz, 70Hz, 75Hz
1152x864 75 Hz
1280x768 60 Hz
1280x800 60 Hz
1280x1024 60Hz, 72Hz, 75Hz
1366x768 60 Hz
1440x900 60Hz, 75Hz
1600x1200 60Hz, 70Hz
1680x1050 60 Hz
1920x1080 60Hz