Specifications
Table Of Contents
- Contents
- About this manual
- Safety information
- Important service information
- General checkout
- Related service information
- Lenovo 1051
- Specifications
- FRU replacement notices
- Removing and replacing an FRU
- 1010 Rear cover
- 1020 Right speaker
- 1030 Vibrator motor
- 1040 Sub board
- 1050 LCD FPC
- 1060 Main FPC
- 1070 HDMI FPC
- 1080 Hall sensor FPC
- 1090 Main board
- 1100 Left speaker
- 1110 Rear camera
- 1120 USB and volume key FPC
- 1130 Volume key
- 1140 LTE main antenna (LTE version) or WIFI2 antenna (WiFi version)
- 1150 LTE MINO/GPS/WIFI1 antenna (LTE version) or GPS/ WIFI1 antenna (WiFi version)
- 1160 WIFI2 antenna (LTE version)
- 1170 Battery pack
- 1180 Power key
- Locations
- Parts list
- Notices
Lenovo 1051 Hardware Maintenance Manual
22
Checking the internal battery status
To check the battery status of the tablet, do either of the following:
• Approximate information about the battery status
Get the approximate status of the battery at any time by checking the battery
status icon on the system bar in the upper-right corner of the screen. The
shorter the green bar is, the less the battery power remains.
• Accurate information about the battery status
To get the accurate information about the battery status of the tablet, do the
following:
1. Open the Android Settings screen.
To open the Android Settings screen, do either of the following:
– From the main Home screen, touch the Android Settings icon on
Lenovo Launch Zone. The Android Settings screen is displayed.
– Pull down the application icon from the action bar and then touch
Settings. The Android Settings screen is displayed.
2. Touch Battery in the Device section on the Android Settings screen.
3. The accurate percentage of the remaining battery power is shown on the
screen.