Thanks for choosing A310 products. For the safe and efficient operation of this product, please read this manual and other materials carefully before you first operate it. A310 shall bear no liability for any losses caused by improper operation of this product not in compliance with the instructions and requirements of this manual or by your misunderstanding of this manual, except for losses caused by the improper installation or operation of A310 professional maintenance staff.
service operator, therefore whether these network functions can be used or not depends on your network service operator. The content of this Manual is protected by copyright law. Without the prior authorization of A310, you are not permitted to duplicate or copy this Manual in any way, transmit in any way via wired or wireless networks or translate it into any other languages.
Contents 1 . Attention and Precautions ----------------------------------------------------- 5 1.1 SAFETY PRECAUTIONS ...................................................................... 5 1.2 PRECAUTIONS WHEN USING PHONE ................................................... 5 1.3 PRECAUTIONS WHEN USING BATTERIES ............................................. 6 1.4 PRECAUTIONS FOR CHILDREN............................................................. 6 2 .
.8 CALL RECORDS............................................................................... 20 4.9 CALL OPTIONS ................................................................................ 21 4.10 CREATE A NEW SHORT MESSAGE .................................................... 22 4.11 CREATE A NEW MULTIMEDIA MESSAGE ........................................... 22 4.12 ADD NEW ENTRY ........................................................................... 23 4.13 NETWORK SETTINGS ....................
1 . Attention and Precautions Please read these brief rules. Violation of these rules might cause danger or break laws. 1.1 Safety Precautions Road safety comes first When driving, care must be taken for using phone; if driving conditions are poor, please pull up at road side to use phone. Power off your phone in hospitals Please abide by relevant regulations or rules. Please power off when close to medical equipment. Power off your phone in aircrafts Wireless phones can cause interference.
Use sensibly Use phone only in its normal position. Please do not touch antenna area unless necessary. Use qualified servicing Only qualified maintenance staff can assemble or repair the equipment. Waterproof Your phone is not waterproof, please keep it dry. Emergency calls Make sure the phone is powered on and in service. Input emergency service number and press Dial key, give your location and do not end the call until told to do so. 1.
2 . Your Phone Description of keypad keys 1, OK key In standby mode ,press this key enter to the Browser. 2，Left soft key Carry out the functions of the indicator showed at the lower left corner of the monitor. 3, Dial key Dial or answer a phone call.
This key has different functions in different state or function menus. 5, 0 key Hold down the 0 key when the phone is idle to enter a “+" symbol (international access code). 6, Direction key The key is split into 4 directional keys: up, down, left and right. Move the curser up, down, left and right in edit mode. Press the directional key in idle interface to enter the corresponding function interface.
GPRS Connected Icons Area Alert Type is Ring Icons Area Alert Type is Vibration Icons Area Alert Type is Vibration and Ring Alert Type is Vibration then Ring Alert Type is Silent Icons Area Icons Area Icons Area Unread SMS Icons Area Unread MMS message Icons Area New WAP Push Icons Area Alarm Enabled Icons Area Call Divert Unconditionally Icons Area Battery level Icons Area New missed calls Icons Area Keypad Locked Icons Area The headset is being used Icons Area Bluetooth is on
3 . Getting Started 3.1 Battery The battery at its initial condition is charged to 50% full, and can be used after unwrapping. For the first three times of charging, do not recharge until the battery is totally exhausted, so that the battery can reach its best usage performance. 3.2 Removing and installing battery For removing: A. Push the battery back cover; B. Lift the battery up as indicated by the arrow; C. Take the battery out.
Warning: Make sure to power off the phone before taking out SIM card, otherwise your SIM card might be damaged. For installing: A. Place the metal contact points of the battery upward and flush with metal contact points in the battery bay, then insert the bottom of battery into battery bay; B. Place the back cover of the battery onto the phone squarely, and push in the direction of the arrow till it clicks into place.
Charging Battery While charging, the power supply indicator at phone’s screen icon zone will flash in a rotation manner, if the phone is off while charging, a charging screen will still appear, indicating that the phone is recharging. If the phone is still being overused while the power supply is insufficient, the recharging indicator will appear on the screen after the recharging has started for a while.
battery, the phone and the charger will become hot during the charging process. Charging completing, disconnect the phone and the charger from the AC power supply. Note: Battery must be charged in a well ventilated place with surrounding temperature at -10℃~+55℃, and it is imperative that a charger provided by manufacturer is used. Using unauthorized charger might cause danger, which also violates warranty terms prescribed by the manufacturer.
Insert SIM card into SIM card socket. When you need to remove SIM card, please power off the phone first, remove battery, then remove the card. 3.5 Inserting and removing memory card Power off the phone; remove battery and other external power connection. Insert memory card into card slot as shown in the image.
3.6 Power on/off phone To power on or power off phone, please press and hold the End key. Then the screen will display the following prompts in sequential order: Enter phone password – if you have set up phone lock password. Enter PIN – if you have set up SIM card password. Search – the phone will search till finding appropriate network connection. 3.7 Unlocking SIM card To prevent illegal usage, PIN (Personal Identification Number) code is adopted to encrypt for protection of your SIM card.
code each time you start it, unlocking SIM card to use the mobile phone. Users can erase SIM card password; however, in this case SIM card cannot prevent illegal usage. Press and hold the End key to power on the phone; Enter PIN code, use right soft key to delete input-errors, left soft key for "OK". For instance, if PIN setting is 1234, then enter the following input: 1 2 3 4 "OK". If there are three consecutive input errors, your SIM card will be locked up by the network, the phone will inquire PUK code.
displayed on the top central part of the text and graphic area. At this time your phone has been connected to the service network. Note: If the screen prompts "Emergency ", this means you have moved out of the normal network coverage (service range) or your card has not passed authentication, but you can still transmit emergency calls based on signal strength.
4 . Basic Functions 4.1 Making a call When the logo of service provider appears on the display screen, you can dial or receive calls. The info bar at the upper left corner of the display screen shows network signal strength (when there are 5 info bars the signal is at its strongest). The call quality is very likely to be affected by obstructions; therefore movement in a small area can effectively improve call performance. 4.
order: Area code Power board number P Extension number Dial Key 4.4 Dialing international calls To make an international call, you may press 0 key to power continually, till the screen displays the pre-digit symbol "+" for international long distance call, which will enable you to make a call from any country without knowing the local international access code. You can enter numbers in the following sequence to make an international call: + Country code complete phone number Dial Key.
All phone numbers in the list can be dialed directly by pressing the Dial key. When the list is displayed, press “OK” to read the details, then “options” to Save or Delete the number. 4.6 Emergency calls As long as in the network service range (which can be confirmed by checking the signal strength bars on the top left corner of the screen), you can always call emergency service.
4.9 Call options In connected state, pressing left soft key “Options” can enter call option, or pressing right soft key "H-free" to activate speaker, under activated-hands free condition, press right soft key “H-hold" to power off speaker. Operation methods of call options are the same with that of Function menu.
mute function is on. DTMF Operations of DTMF powering on and off Conference* Enter multiple party conference call state.
Enter text in Edit content by selecting Edit. Press the left soft key (Option) and select the items you want to send, including images (add picture), audios (add audios), add video files in other formats (Add attachment) and slide (add slide before/after), add bookmark text, preview and so on. Confirm the contents by selecting Option and Done. Press the right soft key (Done) for send options. 4.12 Add new entry 1. Select “Phone Book > Add New Entry”. 2.
5 .
8-4 Stopwatch 8-5 Calculator 8-6 Sound Recorder 8-7 Unit Converter 8-8 Currency Converter 8-9 World Clock 8-10 Bluetooth 8-11 User Profiles 8-12 File Manager 25 9 Settings 9-1 Display Characteristic 9-2 Phone Setup 9-3 General Call Setting 9-4 Shortcuts 9-5 Security Setup 9-6 Network Setup 9-7 Data account 9-8Restore Factory Settings
6 . Input method 6.1 Entering Eng (ABC and abc) In the "ABC" or "abc" input mode, you can press a key labeled the desired letters once to enter the first letter on the key, twice to enter the second letter on the key, and so on. 6.2 Entering Numbers In the "123" input mode, press a key labeled the desired number. In the "ABC" or "abc" input mode, press a numeric key repeatedly until the desired number appears on the screen. 6.3 Entering Symbols To any input modes, press * key to display a symbol list.
7 7 . Appendix 1. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
