Lenovo Mobile Phone User Manual Model: Lenovo E160C Please read this manual carefully before operating this product.
Thank you for choosing Lenovo products. Lenovo Mobile follows the policy of continuous development. Therefore, Lenovo Mobile reserves the right to modify and improve any products described in this document without notice in advance. Under any circumstance, Lenovo Mobile bears no responsibility for any data or income loss or any special, incidental, special or consequential loss, regardless of the reasons of such loss. Content of this document is provided to users on “as is” basis.
目录 1. 2. Safety and Maintenance ----------------------------------------------------------------------4 Installation and Charging --------------------------------------------------------------------8 2.1 INSTALL THE BATTERY .......................................................................................... 8 2.2 CHARGE THE BATTERY ......................................................................................... 8 2.3 INSTALL THE UIM CARD.......................................................
1. Safety and Maintenance Please follow the precautions below to use your phone: •Please read this manual carefully before using this phone. •If use of mobile phone is prohibited or will lead to interference or danger, do not power on your phone. •You are prohibited to use a mobile phone on board an aircraft, so keep it powered off. If the alarming and calendar features of your mobile phone can automatically power on your phone, check and disable these features before boarding an aircraft.
•Do not disassemble your mobile phone. •Do not clean mobile housing with any dissolved matter, such as benzene, thinner or alcohol. Don’t expose your phone to corrosive chemicals, such as cleaning agents. Use only clean, soft cloth to clean your phone gently. •Never expose your mobile phone to direct sunlight or heavy smog or dust. •You mobile phone is not waterproof, so keep it dry. Never use your battery in a high humidity environment, such as in a bathroom. Keep it away from rain or damp.
objects, such as a coin, pen, or paper clip, so keep the battery away from metal objects. •Keep metal contacts and the battery clean. •Never use damaged or exhausted batteries. •Replace the battery when it fails to meet the performance requirements. A battery can be recharged for hundreds of times until replacement is necessary. As consumer goods, a battery can be charged and discharged for hundreds of times, but its capacity will decrease gradually.
•Do not short-circuit your charger. Mechanical vibration or shaking of your charger is prohibited. Do not exposure your battery to strong sunlight. It is prohibited to use your phone under high humidity environments, such as in the bathroom. The device is not waterproof, so keep your phone away from rain or damp. •Do not use your charger in the vicinity of electronic devices such as TV or radio. •Hold firm the charger to unplug. Never pull the wire, otherwise the wire might be damaged.
2. Installation and Charging 2.1 Install the battery 1. Align the metal contact of the battery with the groove at the bottom of the cabinet. 2. Press the battery towards the mobile phone and press down until it is buckled. Refer to the following figure: 2.
Note: Please handle carefully. Do not pull out the charging interface by force. This may damage your mobile phone or charger. • Before use, battery supplied with your mobile phone should be completely charged. • While charging, do not remove the battery or UIM card. • Once the battery is used up, the mobile phone will shutdown automatically. 2.3 Install the UIM card Power off the phone and then remove the back cover and the battery.
2.5 Security password You can use access password to prevent unauthorized use of your phone. 2.5.1 PIN code PIN code is used to prevent illegal use of user’s UIM card. If your phone has enabled PIN code protection, there will be prompt for entering PIN code after boot. If wrong PIN codes is entered for three times, the UIM card will be automatically locked. You should input PUK code to unlock the key. PIN code can be obtained from your network operator. 2.5.
3. Phone Layout and Key Functions 3.1 Key description Left soft key Dial key Number key * key Direction key Right soft key End key OK key # key The four-way navigation key is used to quickly enter 4 fixed menus and select menu items in menu operation.
4. Main Function Guide 4.1 Making a call When logo of network service provider appears on the screen, you can dial or answer calls. Signal bars at upper left corner of the screen show intensity of network signal. Since quality of call is greatly affected by barriers, movement in small range can effectively improve quality of calls. Dialing international numbers To dial international numbers, hold the number key 0 until pre-fix “+” for international long-distance call appears on the screen.
5. Input Methods In text input area, press # key to switch input methods: pinyin input method, stroke input method, Abc / ABC/ abc input method, 123 number input method and smart English input method. 5.1 Pinyin input method Provide Chinese input. Press corresponding keys of pinyin letters, the input line will automatically list all possible pinyin combinations and candidate characters. 5.
6. Function List 1 Scene Mode 6 Settings 2 Call Logs 7 Customer Service 3 QQ 8 Phonebook 4 Messages 9 Tools 5 Tianyi Note: For menu options of “UIM card applications”, the displayed content is related to the network service provider of the UIM card.
7. Technical Parameters Standard Product: CDMA 1X digital mobile phone Model: Lenovo E160C System: CDMA 800 Ambient Temperature Highest: +55°C Lowest: -10°C Basic Parameters Weight(including standard battery): around 77.8g Dimension(Length × width × thickness): around 104 X 43.3 X 16.3mm Talk time: 120-240min* Pure standby time:100-150h* * Depending on local network signal environment.
8. RF Exposure Information The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This model (FCC ID: YCNE160C) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.443 W/kg and when properly worn on the body is 1.272 W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.5cm from the body.
9. Important Security Information — Medical Equipment Any radio transition equipment (including this equipment) may interrupt medical equipment improperly protected. If you have any question or if you are not sure if the medical equipment can screen external RF energy, please consult medical staff or manufacturers. Please observe relevant regulations in places where electronic device or wireless transmission function of mobile phone is prohibited.
Chip x components Assembled x components O O O O O O O O O O Charger x O O O O O Battery x O O O O O Headset x O O O O O Data cable x O O O O O Packing accessories O O O O O O Environmental Note 1: The contents of lead in chip electronic components (such as protection high voltage resistor, ceramic resistor and diode) for special purposes user period in the mobile pone, the battery and the charger may be ≥0.1%.
