Thanks for choosing Lenovo A332 products. For the safe and efficient operation of this product, please read this manual and other materials carefully before you first operate it. Lenovo shall bear no liability for any losses caused by improper operation of this product not in compliance with the instructions and requirements of this manual or by your misunderstanding of this manual, except for losses caused by the improper installation or operation of Lenovo professional maintenance staff.
The content of this Manual is protected by copyright law. Without the prior authorization of Lenovo, you are not permitted to duplicate or copy this Manual in any way, transmit in any way via wired or wireless networks or translate it into any other languages.
Contents 1 . Attention and Precautions ---------------------------------------------------- 5 1.1 SAFETY PRECAUTIONS......................................................................... 5 1.2 PRECAUTIONS W HEN USING PHONE..................................................... 5 1.3 PRECAUTIONS W HEN USING BATTERIES ............................................... 6 1.4 PRECAUTIONS FOR CHILDREN............................................................... 6 2 .
.9 CALL OPTIONS ................................................................................... 18 4.10 CREATE A NEW SHORT MESSAGE ...................................................... 20 4.11 CREATE A NEW MULTIMEDIA MESSAGE ............................................. 20 4.12 ADD NEW CONTACT ......................................................................... 21 4.13 NETWORK SETTINGS ....................................................................... 21 5 .
1 . Attention and Precautions Please read these brief rules. Violation of these rules might cause danger or break laws. 1.1 Safety Precautions Road safety comes first When driving, care must be taken for using phone; if driving conditions are poor, please pull up at road side to use phone. Power off your phone in hospitals Please abide by relevant regulations or rules. Please power off when close to medical equipment. Power off your phone in aircrafts Wireless phones can cause interference.
Use sensibly Use phone only in its normal position. Please do not touch antenna area unless necessary. Use qualified servicing Only qualified maintenance staff can assemble or repair the equipment. Waterproof Your phone is not waterproof, please keep it dry. Emergency calls Make sure the phone is powered on and in service. Input emergency service number and press Dial key, give your location and do not end the call until told to do so. 1.
2 . Your Phone Description of keypad keys 1，Left soft key Carry out the functions of the indicator showed at the lower left corner of the monitor. In standby mode ,press this key enter to the main menu. 2, Dial key Dial or answer a phone call. 3, Direction key The key is split into 4 directional keys: up, down, left and right.
the curser up, down, left and right in edit mode. Press the directional key in idle interface to enter the corresponding function interface. Up Key: to access the Movistar; Down Key: to access the Phonebook; Left Key: to access the Games; Right Key: to access the New Message. 4, Right soft key Carry out the functions of the indicator showed at the lower right corner of the monitor. 5, OK key In standby mode ,press this key enter to the Browser. 6, End key End or reject a call.
Signal strength indicator GPRS Connected Icons Area Alert Type is Ring Icons Area Icons Area Alert Type is Vibration Icons Area Alert Type is Vibration and Icons Area Ring Alert Type is Vibration then Icons Area Ring Alert Type is Silent Icons Area Unread SMS Icons Area Unread MMS message New WAP Push Icons Area Alarm Enabled Icons Area Call Divert Unconditionally Icons Area Icons Area Battery level Icons Area New missed calls Icons Area Keypad Locked Icons Area The headset is be
3 . Getting Started 3.1 Battery The battery at its initial condition is charged to 50% full, and can be used after unwrapping. For the first three times of charging, do not recharge until the battery is totally exhausted, so that the battery can reach its best usage performance. 3.2 Removing and installing battery For removing: A. Push the battery back cover; B. Lift the battery up as indicated by the arrow; C. Take the battery out.
with metal contact points in the battery bay, then insert the bottom of battery into battery bay; B. Place the back cover of the battery onto the phone squarely, and push in the direction of the arrow till it clicks into place. Charging Battery While charging, the power supply indicator at phone’s screen icon zone will flash in a rotation manner, if the phone is off while charging, a charging screen will still appear, indicating that the phone is recharging.
Note: Battery must be charged in a well ventilated place with surrounding temperature at -10℃~+55℃, and it is imperative that a charger provided by manufacturer is used. Using unauthorized charger might cause danger, which also violates warranty terms prescribed by the manufacturer. If the charging temperature is too high or too low, the phone will automatically give warning and stop charging, so as to prevent damages to battery or dangers. 3.
3.5 Inserting and removing memory card Power off the phone; remove battery and other external power connection. Insert memory card into card slot as shown in the image. 3.6 Power on/off phone To power on or power off phone, please press and hold the End key. Then the screen will display the following prompts in sequential order: Enter phone password – if you have set up phone lock password. Enter PIN – if you have set up SIM card password.
Search – the phone will search till finding appropriate network connection. 3.7 Unlocking SIM card To prevent illegal usage, PIN (Personal Identification Number) code is adopted to encrypt for protection of your SIM card. Selecting this option and if having set up PIN code protection, you have to enter PIN code each time you start it, unlocking SIM card to use the mobile phone. Users can erase SIM card password; however, in this case SIM card cannot prevent illegal usage.
mode. 3.9 Connecting to network After SIM card is successfully unlocked, the phone will automatically search available network (with searching showing on the screen). Once the connection is made, the name of the service provider will be displayed on the top central part of the text and graphic area. At this time your phone has been connected to the service network.
4 . Basic Functions 4.1 Making a call When the logo of service provider appears on the display screen, you can dial or receive calls. The info bar at the upper left corner of the display screen shows network signal strength (when there are 5 info bars the signal is at its strongest). The call quality is very likely to be affected by obstructions; therefore movement in a small area can effectively improve call performance. 4.
Area code Power board number P Extension number Dial Key 4.4 Dialing international calls To make an international call, you may press 0 key to power continually, till the screen displays the pre-digit symbol "+" for international long distance call, which will enable you to make a call from any country without knowing the local international access code. You can enter numbers in the following sequence to make an international call: + Country code complete phone number Dial Key.
n When the list is displayed, press “OK” to read the details, then “options” to Save or Delete the number. 4.6 Emergency calls As long as in the network service range (which can be confirmed by checking the signal strength bars on the top left corner of the screen), you can always call emergency service. If your network supplier does not provide roaming service in your area, the screen will display "Emergency", to inform you that only emergency call is permitted.
or pressing right soft key "H-free" to activate speaker, under activated-hands free condition, press right soft key “H-hold" to power off speaker. Operation methods of call options are the same with that of Function menu. This call options can only be viewed during call process, moreover, the functions of call waiting, call holding, and conference calls need service support, please contact your service provider for details.
Enter multiple party conference call state. By following the prompts, you can have the following functions: receive waiting calls, add them into multiple party call, maintain the multiple party call, talk privately with one party of the conference while maintaining all other callers, connect one party in the call conference with another party while exiting the multiple party call oneself, maintain one party of the multiple party call and end current call and all other maintained calls.
6. Press the right soft key (Done) for send options. 4.12 Add new contact 1. Select Phone Book and then press left soft key(Option) to select Add number. 2. Select To SIM or To phone for saving the contact. 3. Edit contact. If you want to save to SIM, you can only edit name and number. 4. Finish editing, press right soft key (Done), pop-up message to preserve the contact person. 5. Press left soft key（Yes）to save; press right soft key（No）to exit. 4.13 Network Settings Setup the data account: 1.
5 .
6 . Input method 6.1 Entering Eng (ABC and abc) In the "ABC" or "abc" input mode, you can press a key labeled the desired letters once to enter the first letter on the key, twice to enter the second letter on the key, and so on. 6.2 Entering Numbers In the "123" input mode, press a key labeled the desired number. In the "ABC" or "abc" input mode, press a numeric key repeatedly until the desired number appears on the screen. 6.3 Entering Symbols To any input modes, press * key to display a symbol list.
7 . Appendix This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
SAR The phone with Internal antenna has been tested for compliance with FCC RF Exposure(SAR) limits and is comlpied with FCC RF exposure compliance requirements. Max. SAR Measured (1g): 1.16W/kg(GPRS/2slot uplink /Rear /Low) While there may be differences between the SAR levels of various phones and at various positions,they all meet the government requirement for RF exposure.
