User's Manual

FCC RF Exposure Information (SAR)

This device is designed and manufactured not to exceed the emission limits for

exposure to radio frequency (RF) energy set by the Federal Communications

Commission of the United States, Industry Canada of Canada.

During SAR testing, this device is set to transmit at its highest certified power

level in all tested frequency bands, and placed in positions that simulate RF

exposure in usage against the head with no separation, and near the body with

the separation of 0 mm. Although the SAR is determined at the highest certified

power level, the actual SAR level of the device while operating can be well below

the maximum value. This is because the device is designed to operate at

multiple power levels so as to use only the power required to reach the

network. In general, the closer you are to a wireless base station antenna, the

lower the power output.

The exposure standard for wireless employs a unit of measurement known as the

Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg, and

1.6W/kg by Industry Canada.

This device is compliance with SAR for general population /uncontrolled

exposure limits in ANSI/IEEE C95.1-1992 and Canada RSS 102, and had been

tested in accordance with the measurement methods and procedures specified in

OET Bulletin 65 Supplement C, and Canada RSS 102. This has been tested, and

meets the FCC, IC RF exposure guidelines when tested with the directly

contacted to the body.

The FCC has granted an Equipment Authorization for this model device with all

reported SAR levels evaluated as in compliance with the FCC RF exposure

guidelines. SAR information on this model device is on file with the FCC and