User Guide
Table Of Contents
- Shipping and Packing List
- Optional Accessories
- Introduction
- Terminology
- Installation Considerations
- Overview
- Downloading Lennox Smart Technician App
- Installation
- Adding SAQM
- Management - Replace, Remove and Factory Reset
- Dimensions, Operating and Storage Specifications
- Thermostat Alert Codes for the Smart Air Quality Monitor
- Lennox Smart Air Quality Monitor Troubleshooting
- FCC Compliance Statement
8
When the switch is set to the DOWN position it will
turn off the internal fan and stop air quality data to
the thermostat.
An alert code 70003 will be displayed indicating
the switch is OFF. The alert code will automatically
clear once the switch has been set back to the ON
position.
While the switch is in the DOWN position, the
latest reading from the SAQM will be displayed on
the thermostat. It will not update that information
until the switched is moved back to UP position.
IMPORTANT
The dealer and homeowner may receive an
email indicating that Alert Code 70003 is a no
cool, no heat condition. This is not true and the
HVAC system will operate normally. This type of
notication is due to alert code being classied
as a Service Urgent.
Downloading Lennox Smart Technician App
Scan the QR codes listed as follows to
download the specic application you
desire.
Google Play
TM
App Store
Google Play
TM
App Store