User Guide

17
8. Perform a factory reset to ensure the removed
SAQM has been completely removed from
the smart devices network.
IMPORTANT
It is important that at least one smart device
needs to be paired to the smart devices network.
Removing all devices will deactivate the smart
devices network. Creating a new network will
have to be accomplished by your installer.

1. Navigate to Dealer Control Center >
Equipment Settings
2. Select the SAQM device to be removed.
3. Select remove and follow any additional
screen prompts.

To perform a factory reset of this device use the
following procedure:
a. Press and hold the pairing button for 10
seconds and release.
b. A ashing green light on the device
indicates it has been factory reset and is
ready to be paired.
After performing the factory reset, the SAQM can
be reused with another S40 thermostat in the
home.
Dimensions, Operating and Storage
Specifications
The following is the operating and storage
specifications for the device:
• Operating temperature: -4°F to 131°F (-20°C to
55°C)
• Operating humidity: 5%RH to 95%RH
• Storage temperature: -40°F to 185°F (-40°C to
85°C)
• Storage humidity: 5%RH to 95%RH
• Unit Dimension: 3-5/8 x 4-3/8 x 1-3/8 in. (92 x
111 x 35 mm).