User Guide

Scan QR Code for S30
Installation and Setup Guide
Step 4
Commissioning the
S30 Thermostat
Step 5
Helping Homeowner Connect to Wi-Fi
Using the Thermostat
Dealer
Info
General
Information
Equipment
Found
Reminders
Shows welcome screen. Error
will show if the HD display is not
connected properly.
Set time, date, language and
termperature (Fahrenheit or Celsius).
Automatically detects communicating
equipment and equipment interface module
(EIM). Non-Communicating equipment is
added in this screen.
Specify reminder types and reminder
frequency (ex: change filter every 3
months).
Boot - Up
Using the iComfort Dealer Setup App
1. Download and install the iComfort Dealer Setup App if not
already installed.
2. Apply power to the system. Cancel the Apple HomeKit screen
for now. Remove the S30 HD display from the subbase.
Once commissioning is completed, then the HD display can
be reattached to the sub-base.
3. On the smart hub, press the commissioning button located
on the side of the unit.
4. The commissioning status LED will start blinking green and
the smart hub will broadcast its Wi-Fi identifier (SSID) for 2
minutes.
5. Go to your mobile device’s Wi-Fi connection tool and locate
the smart hub Wi-Fi broadcast identifier. Example identifier
(SSID) is DIRECT-XY12-3456.
6. Connect to the smart hub by using the last eight digits
of the smart hub SSID as the password. In this example, it
would be XY123456).
7. Once the mobile
device is
connected to the
smart hub,
the commissioning status
LED will turn solid green.
8. Start the iComfort Dealer
Mobile Setup App and
validate the serial
number of the hub
matches what is in
the mobile app to
ensure connection.
9. Touch the remote-in
tab on the iComfort
Dealer Setup
application home
screen to begin
commissioning.
System Status LED
System Commissioning
Status LED
USB Port
Dealer commissioning and
manual reboot button
Terminal Connection Access Cover
Antenna
1. From the thermostat’s home screen, go to Menu > Settings > Wi-Fi .
2. Slide the option to ON to enable Wi-Fi.
3. Wi-Fi network will show not connected. Press on not connected to display a list of available
access points.
4. A list of networks that have been found within range will be displayed. Select your home
network by pressing on the network name.
5. Enter your home Wi-Fi network password and press join to continue. If successful the
Thermostat Connective Status indicator illustrated below will show checkmarks across all
connections.
NOTE: Whether connecting to a visible or hidden network, if successful, a check mark
will appear above both the router and Internet icons. For information on connecting to hidden
networks, please reference the S30 Homeowner Guide page.
IMPORTANT
ADVANCED DIAGNOSTICS & REMOTE SHARING
Protect homeowner investment and peace of mind with active monitoring of system
operations through the Lennox S30 Smart Thermostat. This feature is free of charge and
provides basic maintenance reminders, alerts homeowner of potential issues, and can
even allow the homeowner to remotely share diagnostics with the Lennox dealer to
troubleshoot and fix problems. This proactive care helps eliminate downtime
and avoid unnecessary service visits and repair costs, ensuring nothing short of perfect air.
Please share this information with homeowner as you ask them to accept the Advanced
Diagnostics & Remote sharing permissions.
NOTE: Installer, please share the homeowner
quickstart guide with homeowner.
Enter dealer ID number. If not
available, enter phone number
associated with the dealer
account. This will enable ability
to do advanced diagnostics and
remote sharing if permitted by
homeowner.
IMPORTANT