APPLICATION GUIDE • Heat pump • Cooling Capacities of 8 a 13 kW FLOOR STANDING
INSTALLATION TECHNICAL DATA VERTICAL FLOOR SPLIT. HEAT PUMP R22 HEAT PUMP UNIT Cooling capacity Heating capacity Cooling mode power input Heating mode power input Current Voltage: 50 Hz Indoor U. air flow (Height) Compressor Sound level Bevel coupling pipe Dimensions Net weight (1) At Eurovent Conditions Cool Heat Indoor U. Outdoor U. Liquid Gas Indoor U. Outdoor U. Indoor U. Outdoor U.
Safety Precautions Operating Instructions Care and Maintenance Troubleshooting Tips Features and Specifications Features 1 Designed for cooling and heating 6 Removable air filter 2 Super energy efficiency 7 Anti-Bacteria filter 3 Micom control 8 3 minutes delay circuit 4 Whisper quiet operation 9 Auto restart 5 Wireless remote control Specifications Air Outlet Vent Remote Signal Receptor Air Inlet Vent (Rear) Air Inlet Vent Air Outlet Vent 2
Indoor Unit Controls and Indicators The remote control transmits the signals to the system.
Safety Precautions Operating Instructions Name and Function-Remote Control Control 1 1 2 2 12 11 4 10 9 7 8 3 6 Care and Maintenance Operation Display of the Remote Control 3 Indoor Fan Speed Selection Button • To select the desired fan speed in three steps [Low, Med, High] 4 5 Cooling ON Button 6 Power ON/OFF Button • Operation will start when this button is pressed, and stop when the button is pressed again.
1 ENGLISH Remote Control Preparation How to mount onto a wall Use the screws to secure the holder to the wall or attach the holder side of indoor unit. 2 To insert the remote control to the holder. Insert Pull How to insert batteries • Do not use rechargeable batteries such batteries are different from standard dry cells in shape, dimensions, and performance. Remove the cover from the back of the remote controller. • Slide the cover according to the arrow direction. Insert two batteries.
Safety Precautions Air conditioner operation 1 How to use the Operation Mode Button • Each time the Operation Mode Selection Button is pressed, the Operation Mode is shifted in the arrow direction.
Cooling Operation Mode 1 2 ENGLISH 3 Press the Start/Stop Button. Select Cooling Operation. Press the Operation Mode Selection Button. Press the Cooling Operation Button on the remote controller. MODE H 3 ROOM TEMP SET TEMP OUT DOOR ROOM TEMP SET TEMP OUT DOOR Set the temperature lower than the room temperature. The temperature can be set within a range of 16°C~30°C by 1°C. MODE To raise the temperature H To lower the temperature 4 Set the Fan Speed.
Safety Precautions Operating Instructions Soft Dry Operation 4 Press the Start/Stop Button. 1 2 Select Soft Dry Operation. Press the Operation Mode Selection Button. Press the Soft Dry Operation Button on the remote controller. MODE H Troubleshooting Tips Care and Maintenance ROOM TEMP SET TEMP 3 OUT DOOR Set the temperature lower than the room temperature. The temperature can be set within a range of 16°C~30°C by 1°C.
ENGLISH 5 Heating Operation Mode(Heat Pump Model Only) Press the Start/Stop Button. 1 2 Select heating Operation. Press the Operation Mode Selection Button. Press the heating Operation Button on the remote controller. MODE H ROOM TEMP SET TEMP 3 OUT DOOR Set the temperature upper than the room temperature. The temperature can be set within a range of 16°C~30°C by 1°C. MODE H ROOM TEMP SET TEMP OUT DOOR To raise the temperature To lower the temperature 4 Set the Fan Speed.
Safety Precautions Operating Instructions 6 Electric Heater Operation Mode(Option) 1 2 Press the Start/Stop Button. Select heating+ E/heater Operation. Press the Operation Mode Selection Button. Press the Heater Operation Button on the remote controller.(When the unit operates in heating mode.) MODE H OUT DOOR Troubleshooting Tips Care and Maintenance ROOM TEMP SET TEMP 3 Set the temperature upper than the room temperature. The temperature can be set within a range of 16°C~30°C by 1°C.
Auto Operation Mode(Cooling Model Only) 1 2 ENGLISH 7 Press the Start/Stop Button. Select Auto Operation. Press the Operation Mode Selection Button. Press Auto Operation Button on the remote controller. MODE H ROOM TEMP SET TEMP 3 OUT DOOR Set the temperature upper than the room temperature. The temperature can be set within a range of 16°C~30°C by 1°C.
Safety Precautions Fan Operation Mode(Cooling Model Only) 8 1 Press the Start/Stop Button. 2 Press Fan Operation Button. H Troubleshooting Tips Care and Maintenance Operating Instructions ROOM TEMP SET TEMP 3 OUT DOOR Set the Fan Speed. MODE ❑ Each time the Button is pressed, the Fan Speed mode is shifted. Airflow Direction Procedure 9 1 Press the Auto Swing Button and then Press the Start/Stop Button. left and right.
OFF Timer Setting Procedure(OFF TIMER Setting, or CANCEL) 1 2 Press the Start/Stop Button. Press the Timer Button. H ROOM TEMP SET TEMP OUT DOOR • If you press the button, the selected off timer is displayed as follows; • If you select ‘ 3 ’, the Off Timer function will be cancelled. When you finish the Off Timer setting, the Timer indicator lights off.
Safety Precautions 11 Child Lock Operation Procedure Press the low and high temperature setting buttons simultaneously for 3 seconds. The unit will respond with beep. 1 MODE H Care and Maintenance Operating Instructions ROOM TEMP SET TEMP H OUT DOOR ROOM TEMP SET TEMP After 3 seconds, it will be shifted. 2 ROOM TEMP SET TEMP OUT DOOR After 3 seconds, it will be shifted.
Care and Maintenance CAUTION: Before performing any maintenance, turn off the main power to the system. Cleaning of the air filters. Recommended about once every two weeks Cleaning of the air cleaner. Recommended about once every three months Remove the Air Filter. Take hold of the tab and pull slightly forward to remove the filter. Remove the Air Cleaner. Take hold of the tab and pull slightly forward to remove the air cleaner. Clean.
Safety Precautions Before you call for service... ? Troubleshooting Tips! Save time and money! Check the following points before requesting repairs or service.... If the fault persists, please contact your dealer or service center. Case Troubleshooting Tips Care and Maintenance Operating Instructions Does not operate.
BELGIUM : CZECH REPUBLIC : FRANCE : GERMANY : LENNOX BENELUX N.V./S.A. tél. : + 32 3 633 30 45 fax : + 32 3 633 00 89 e-mail : info.be@lennoxbenelux.com LENNOX JANKA tél. : + 420 2 510 88 111 fax : + 420 2 579 10 393 e-mail : janka@janka.cz LENNOX FRANCE tél. : + 33 4 72 23 20 20 fax : + 33 4 78 20 07 76 e-mail : accueil@lennoxfrance.com LENNOX DEUTSCHLAND GmbH tél. : + 49 69 42 09 79 0 fax : + 49 69 42 09 79 40 e-mail : info.de@lennoxdeutschland.com MIDDLE EAST : LENNOX DISTRIBUTION tél.
