User Guide
icomfort Wi-Fi 7−Day Programmable Communicating Thermostat
Page 37
Table 3. Adjustable Parameters Table (Installer)
Parameter Name: Default Parameter Value Setting Increment Installer entry
System (Go to equipment button and scroll to System) NOTE − All of the following changes are made on the stat.
Equipment Name (keyboard input screen)
Filter 1 Timer Selection Calendar Time Calendar Time, Run Time
Filter 2 Timer Selection Calendar Time Calendar Time, Run Time
UV Bulb Timer Selection Calendar Time Calendar Time, Run Time
Humidifier Pad Timer Selection Calendar Time Calendar Time, Run Time
PureAir Timer Selection Calendar Time Calendar Time, Run Time
Smooth Setback Recovery Enabled Enabled, Disabled
Auto Changeover − Temp Deadband 5ºF 3 to 9ºF 1ºF
Electric Heat Control Mode Standard Standard, Even Heat
Gas Heat Control Mode: (SLP98, G71MPP) Load Tracking Load Tracking Variable Capacity, Variable Capacity, Staged
(SL280, EL296) Staged Staged only
Max Heat Setpoint 90ºF 40 to 90ºF 1ºF
Min Cool Setpoint 60ºF 60 to 99ºF 1ºF
Heat Cool Stages Locked In Disabled Enabled, Disabled
*1st Stage Differential 1.0ºF 0.5 to 3ºF 0.5ºF
*2nd Stage Differential 1.0ºF 0.5 to 8ºF 0.5ºF
*3rd Stage Differential 0.5ºF 0.5 to 8ºF 0.5ºF
*4th Stage Differential 0.5ºF 0.5 to 8ºF 0.5ºF
*5th Stage Differential 0.5ºF 0.5 to 8ºF 0.5ºF
*6th Stage Differential 0.5ºF 0.5 to 8ºF 0.5ºF
Stage Delay Timers Enabled Enabled, Disabled
*2nd Stage Delay 20 Minutes 5 to 120 Minutes 5 Min
*3rd Stage Delay 20 Minutes 5 to 120 Minutes 5 Min
*4th Stage Delay 20 Minutes 5 to 120 Minutes 5 Min
*5th Stage Delay 20 Minutes 5 to 120 Minutes 5 Min
*6th Stage Delay 20 Minutes 5 to 120 Minutes 5 Min
*Number of stages shown in thermostat is dependent on equipment that is installed. Electric heat will bring on 2 elements at a time if available.
table continued on next page










